The exam-n class – release notes
- 1.1.4, 2016 December 19
 
- Documentation: add notes about use of pdfpages.
 
- Added 
[largefont] option.
Note:
option [hugefont] has replaced [bigfont];
the latter is now deprecated, and may be removed in v1.2. 
- Use of the 
\part macro is now supported within
solutions (it produced the wrong numbers before), and there is a new
\StylePartNumber customisation macro. 
 
- 1.1.3
 
- Version 1.1.3 was never released
 
 
- 1.1.2, 2015 November 26
 
- Handled trailing floats at end of document (generated by packages
such as 
rotating. 
\label within question environment now refers to the
question number. 
- Work around a problem when a paragraph starts with 
{\bf ...}
rather than (post-1995) \textbf{...}. 
\begin{questiondata} now starts a new paragraph. 
- Some documentation adjustments.
 
 
- 1.1.1, 2014 November 27
 
- Adjust 
\partmarks* behaviour; now behaves differently
within display maths (addresses
issue 1). 
- Various documentation and release fixes.
 
 
- 1.1, 2014 May 3
 
- Converted to a generic class, 
exam-n, ready for wider
distribution.
Available on bitbucket
and at CTAN. 
- 1.0.16, 2014 February 28
 
- Option mtpro2 now switches to times (this fixes a pre-existing bug
  exposed by the [sansserif] option).
 
- The [bigfont] option now works (this fixes a pre-existing bug, to
  do with 
\subsections, which was exposed by the addition
  of the [bigfont] option). 
- Added the [bigfont] option
 
- Fixed 'shouts' warning at start (again)
 
- Forbid *section commands inside questions (and don't freak out)
 
- Rename 
\questiontrailer to \questionpreamble (more logical) 
- Fixed mcq warnings, and 'question continued' errors.
 
- Renamed 
\multiplechoicequestions to more logical
  \multiplechoiceanswers 
- Various (further) spacing changes
 
- Added 
\subsection 
- Release includes
1.0.16b1 (2014 January 20);
1.0.16b2 (20 January);
1.0.16b3 (22 January);
1.0.16b4 (14 February).
 
 
- 1.0.15, 2014 January 19
 
- Fixed mcq and showsolutions, to suppress incorrect warning of missing answers.
 
 
- 1.0.14, 2014 January 10
 
- pdfpages content now appears in draft mode.
 
- The 
[draft] option now implies [showsolutions] (so if
you want to suppress the solutions in this mode, you must now follow
[draft] with [noshowsolutions]). 
- Showing missing information: shouts and missing exam date/time are
now highlighted.
 
- Fixed bug where excess 
\QuestionNumberChecksOff
caused question numbers to disappear. 
- Remove indent at start of question.
 
 
- 1.0.13, 2013 December 4
 
- Added a 
[sansserif] class option. 
- Improved spacing and linebreaking; there are now fewer bad page-breaks.
 
- Added the 
{mcq} environment. 
- Changed the distribution licence from GPL to LPPL.
 
 
- 1.0.12, 2013 November 11
 
- Adjustments to banner text and base rubric (consulting with Morag Casey).
 
- Added notes about 
\includepdf in notes for authors
. 
- Adjustments to the distributed example files.
 
 
- 1.0.11, 2013 July 18
 
- Adjustments to question data: k_B, etc, should have roman subscripts.
 
- 1.0.10, 2013 June 27
 
- Minor documentation and distribution fixes
 
- 1.0.9, 2013 March 22
 
- Remove leftover debugging code (garhhh)
 
- 1.0.8, 2013 March 14
 
- Add the 
mono and colour options. 
- 1.0.7, 2013 March 14
 
- pdfpages is now disabled only in solutions
 
- Minor layout changes (exam title adjusts size for long
titles)
 
 
- 1.0.6, 2013 March 13
 
- Avoid tables and figures in solutions incrementing the float counter.
 
- Layout changes; adjustment to default base rubric; A345 rubric change
 
- Some documentation changes
 
 
- 1.0.4-1, 2013 March 8
 
- This is a bugfix release: it's a re-release of now-deprecated
1.0.5 minus a breaking change.
- Add 
{table} support, paralleling existing
{figure} support (ie tables don't float, but captions
work as expected). 
- Blank lines after a 
\begin{question} no longer
result in extra space. 
- Adjust spacing and layout of front page (again); various other
cosmetic changes.
 
- A document identifier appears at the bottom of each page,
corroborating the exam the page is for (to avoid photocopier collation
accidents), and giving a numeric identifier which increases with time
(allowing you to identify which of two printouts is later).
 
 
- 1.0.4, 2013 March 6
 
- Adjust base rubric; assorted distribution and detail fixes.
 
- 1.0.3, 2013 January 25
 
- Added 
[A2] class option. 
- 1.0.2, 2013 January 25
 
- The `pdfpages' package wasn't working when the `noshowsolutions'
option was present.  Fixed, by special-casing, specifically disabling the
\includepdf command in this case. 
- Adjust display of 
\partmarks (no need for extra
space, since \partmarks is now fully in the margin). 
- Adjusting the front-page layout.  Again.
 
 
- 1.0.1, 2013 January 18
 
{figure} now works, because it's explicitly
supported ({figure} inside solutions could cause problems
before).  The contents don't float. 
- Layout adjustments.
 
- Graphics now appear in draft mode.
 
 
- 1.0, 2012 December 11
 
- This is the nominal version 1.0 release, and will be used for the
2012-13 Honours Astronomy exams (it might get further tweaks along the
way, but we believe this is a complete distribution set).
- More adjustments to notes-for-authors, now showing example LaTeX results.
 
- Addition of template-question.tex
 
- Adjustments to base rubric.
 
 
- 1.0b5, 2012 December 3
 
- Fine formatting adjustments: occasional 
\nobreak and
rationalisation of \maketitle. 
- Improvements to notes-for-authors.
 
 
- 1.0b4, 2012 November 30
 
- Improve generation of PDF metadata.
 
- Add macro 
\shout, for highlighted `FIXME' comments. 
- Add showmarktotals option.
 
- Permit 
\partmarks in solutions, without it adding to
the marks added up for the question (at the same time, forbid having a
solution within a solution). 
- Various formatting adjustments.
 
 
- 1.0b3, 2012 November 8
 
- Add [A345] option.
 
- Make compose/draft material appear in red.
 
- Some packaging changes and bugfixes.
 
 
- 1.0b2, 2012 November 6
 
- Mild formatting adjustments.
 
- 1.0rc1, 2012 November 2
 
- Significant rewrite of formatting, producing a consensus
AandA/PhysHons style, and renaming some confusingly named
commands.
 
- Consequently, the AandA.clo and PhysHons.clo options have
disappeared.
 
- The 
\constantssheet macro has appeared, and setting
this is now the principal function of per-class .clo
files.
See the new A1.clo and modified P2.clo option files. 
 
- 0.17.1, 2012 September 21
 
- Fix packaging infelicity
 
- 0.17, 2012 September 21
 
- Rework 
solutions environment to make it a little more robust. 
- Add 
\MSc degree shorthand. 
- Bugfix: continuation headers now appear if a question starts on page 1.
 
- Bugfix: fix wrong syntax in draft+showsolutions mode -- now works again
 
 
- 0.16, 2012 July 26
 
- Renamed the [showmarks] option to more rational [perquestionmarks]
(because the option doesn't control whether per-question marks are
displayed, but whether they're tracked at all).  Slightly
improved the documentation of this at the same time.
 
- Added 
\lambdabar macro 
- Fix long-standing problem with continuation lines -- these should now be robust.
 
 
- 0.15, 2011 November 23
 
- Avoid conflict with 
ifpdf package.
Now depends on ifpdf. 
- 0.14, 2010 August 6
 
- Fixed the problem where the question-continuation marks would be
messed up by the presence of floats.
 
- Added P2.clo; adjust 'showing solutions' banner
to avoid collision with other headers (thanks to Morag Casey for the .clo
file and the report).
 
- Changed the name of the class to 'guexam', from potentially confusing 'exam'.
Support guexam.config for forcing options (for example).
 
 
- 0.13-1, 2008 November 21
 
- Make the gulogo style optional, so that question authors don't
have to download and install that before they can draft a question.
Also adjust the logo size.
 
- 0.13, 2008 November 11
 
- Add university logo, and slightly rearrange the header.
Add 
{questiondata} environment. 
- 0.12-2, 2008 April 14
 
- ...keep on truckin'.  Further changes to the
\partmarks* spacing code, still largely unprincipled, but
looking closer to what's required. 
- 0.12-1, 2008 April 3
 
- ...and again.  This time, I think I actually see what the problem
was.  Macro 
\partmarks now forces a new paragraph (it was
documented to be usable at the end of a paragraph, so this is again
forced, and the documentation made more explicit), this makes what I
thought was the solution actually work.  Which is nice.  Redefined
enumerate and itemize environments, to
improve spacing somewhat. 
- 0.12, 2008 April 3
 
- Further adjustments to 
\partmarks: again, it should
be more consistent without necessarily being more principled, alas. 
- 0.11, 2008 March 30
 
- Minor fixes: Adjust display of partmarks -- should now be more
consistent; option [showsolutions] no longer defaults
[{no,}pageperquestion]; add macro 
\e to format roman
exponential. 
- 0.10, 2008 January 17
 
- Fix 
\vec when it appears in sub- or superscript
position.  Add \paperident command. 
- 0.9, 2007 December 10
 
- Various formatting changes.  Added optional argument to
\includequestion overriding question number. 
- 0.8, 2007 November 25
 
- You can now use 
\usepackage within
[compose] mode. 
- 0.7, 2007 November 20
 
- Make changes to the display of the 'University of Glasgow' banner
at the top: resolves some font problems.  Other minor layout tweaks.
 
- 0.6, 2007 November 18
 
- Fixed bold maths problems: 
\vec now works with greek
letters, too.  Support MTpro2 (mathtime maths fonts) with the new
[mtpro2] class option.  The {solution}
environment can appear multiple times within a question.  Question
numbers now appear correctly in 'final' mode. 
- 0.5, 2007 October 30
 
- Fix collision with LaTeX internal: a 
\comment at the
start of a {question} now works.