Chapter 9. Reference

Table of Contents

1. Command-Line Options
2. Configuration Commands
3. Configuration Variables
3.1. abort_noattach
3.2. abort_noattach_regexp
3.3. abort_nosubject
3.4. abort_unmodified
3.5. alias_file
3.6. alias_format
3.7. allow_8bit
3.8. allow_ansi
3.9. arrow_cursor
3.10. ascii_chars
3.11. askbcc
3.12. askcc
3.13. assumed_charset
3.14. attach_charset
3.15. attach_format
3.16. attach_save_dir
3.17. attach_sep
3.18. attach_split
3.19. attribution
3.20. attribution_locale
3.21. auto_subscribe
3.22. auto_tag
3.23. autocrypt
3.24. autocrypt_acct_format
3.25. autocrypt_dir
3.26. autocrypt_reply
3.27. autoedit
3.28. background_edit
3.29. background_confirm_quit
3.30. background_format
3.31. beep
3.32. beep_new
3.33. bounce
3.34. bounce_delivered
3.35. braille_friendly
3.36. browser_abbreviate_mailboxes
3.37. browser_sticky_cursor
3.38. certificate_file
3.39. change_folder_next
3.40. charset
3.41. check_mbox_size
3.42. check_new
3.43. collapse_unread
3.44. compose_format
3.45. config_charset
3.46. confirmappend
3.47. confirmcreate
3.48. connect_timeout
3.49. content_type
3.50. copy
3.51. copy_decode_weed
3.52. count_alternatives
3.53. cursor_overlay
3.54. crypt_autoencrypt
3.55. crypt_autopgp
3.56. crypt_autosign
3.57. crypt_autosmime
3.58. crypt_confirmhook
3.59. crypt_opportunistic_encrypt
3.60. crypt_opportunistic_encrypt_strong_keys
3.61. crypt_protected_headers_read
3.62. crypt_protected_headers_save
3.63. crypt_protected_headers_subject
3.64. crypt_protected_headers_write
3.65. crypt_replyencrypt
3.66. crypt_replysign
3.67. crypt_replysignencrypted
3.68. crypt_timestamp
3.69. crypt_use_gpgme
3.70. crypt_use_pka
3.71. crypt_verify_sig
3.72. date_format
3.73. default_hook
3.74. delete
3.75. delete_untag
3.76. digest_collapse
3.77. display_filter
3.78. dotlock_program
3.79. dsn_notify
3.80. dsn_return
3.81. duplicate_threads
3.82. edit_headers
3.83. editor
3.84. encode_from
3.85. entropy_file
3.86. envelope_from_address
3.87. error_history
3.88. escape
3.89. fast_reply
3.90. fcc_attach
3.91. fcc_before_send
3.92. fcc_clear
3.93. fcc_delimiter
3.94. flag_safe
3.95. folder
3.96. folder_format
3.97. followup_to
3.98. force_name
3.99. forward_attachments
3.100. forward_attribution_intro
3.101. forward_attribution_trailer
3.102. forward_decode
3.103. forward_decrypt
3.104. forward_edit
3.105. forward_format
3.106. forward_quote
3.107. from
3.108. gecos_mask
3.109. hdrs
3.110. header
3.111. header_cache
3.112. header_cache_compress
3.113. header_cache_pagesize
3.114. header_color_partial
3.115. help
3.116. hidden_host
3.117. hide_limited
3.118. hide_missing
3.119. hide_thread_subject
3.120. hide_top_limited
3.121. hide_top_missing
3.122. history
3.123. history_file
3.124. history_remove_dups
3.125. honor_disposition
3.126. honor_followup_to
3.127. hostname
3.128. idn_decode
3.129. idn_encode
3.130. ignore_linear_white_space
3.131. ignore_list_reply_to
3.132. imap_authenticators
3.133. imap_check_subscribed
3.134. imap_condstore
3.135. imap_deflate
3.136. imap_delim_chars
3.137. imap_fetch_chunk_size
3.138. imap_headers
3.139. imap_idle
3.140. imap_keepalive
3.141. imap_list_subscribed
3.142. imap_login
3.143. imap_oauth_refresh_command
3.144. imap_pass
3.145. imap_passive
3.146. imap_peek
3.147. imap_pipeline_depth
3.148. imap_poll_timeout
3.149. imap_qresync
3.150. imap_servernoise
3.151. imap_user
3.152. implicit_autoview
3.153. include
3.154. include_encrypted
3.155. include_onlyfirst
3.156. indent_string
3.157. index_format
3.158. ispell
3.159. keep_flagged
3.160. mail_check
3.161. mail_check_recent
3.162. mail_check_stats
3.163. mail_check_stats_interval
3.164. mailcap_path
3.165. mailcap_sanitize
3.166. maildir_header_cache_verify
3.167. maildir_trash
3.168. maildir_check_cur
3.169. mark_macro_prefix
3.170. mark_old
3.171. markers
3.172. mask
3.173. mbox
3.174. mbox_type
3.175. menu_context
3.176. menu_move_off
3.177. menu_scroll
3.178. message_cache_clean
3.179. message_cachedir
3.180. message_format
3.181. meta_key
3.182. metoo
3.183. mh_purge
3.184. mh_seq_flagged
3.185. mh_seq_replied
3.186. mh_seq_unseen
3.187. mime_forward
3.188. mime_forward_decode
3.189. mime_forward_rest
3.190. mime_type_query_command
3.191. mime_type_query_first
3.192. mix_entry_format
3.193. mixmaster
3.194. move
3.195. muttlisp_inline_eval
3.196. narrow_tree
3.197. net_inc
3.198. new_mail_command
3.199. pager
3.200. pager_context
3.201. pager_format
3.202. pager_index_lines
3.203. pager_stop
3.204. pattern_format
3.205. pgp_auto_decode
3.206. pgp_autoinline
3.207. pgp_check_exit
3.208. pgp_check_gpg_decrypt_status_fd
3.209. pgp_clearsign_command
3.210. pgp_decode_command
3.211. pgp_decrypt_command
3.212. pgp_decryption_okay
3.213. pgp_default_key
3.214. pgp_encrypt_only_command
3.215. pgp_encrypt_sign_command
3.216. pgp_entry_format
3.217. pgp_export_command
3.218. pgp_getkeys_command
3.219. pgp_good_sign
3.220. pgp_ignore_subkeys
3.221. pgp_import_command
3.222. pgp_list_pubring_command
3.223. pgp_list_secring_command
3.224. pgp_long_ids
3.225. pgp_mime_auto
3.226. pgp_replyinline
3.227. pgp_retainable_sigs
3.228. pgp_self_encrypt
3.229. pgp_show_unusable
3.230. pgp_sign_as
3.231. pgp_sign_command
3.232. pgp_sort_keys
3.233. pgp_strict_enc
3.234. pgp_timeout
3.235. pgp_use_gpg_agent
3.236. pgp_verify_command
3.237. pgp_verify_key_command
3.238. pipe_decode
3.239. pipe_decode_weed
3.240. pipe_sep
3.241. pipe_split
3.242. pop_auth_try_all
3.243. pop_authenticators
3.244. pop_checkinterval
3.245. pop_delete
3.246. pop_host
3.247. pop_last
3.248. pop_oauth_refresh_command
3.249. pop_pass
3.250. pop_reconnect
3.251. pop_user
3.252. post_indent_string
3.253. postpone
3.254. postponed
3.255. postpone_encrypt
3.256. postpone_encrypt_as
3.257. preconnect
3.258. print
3.259. print_command
3.260. print_decode
3.261. print_decode_weed
3.262. print_split
3.263. prompt_after
3.264. query_command
3.265. query_format
3.266. quit
3.267. quote_regexp
3.268. read_inc
3.269. read_only
3.270. realname
3.271. recall
3.272. record
3.273. reflow_space_quotes
3.274. reflow_text
3.275. reflow_wrap
3.276. reply_regexp
3.277. reply_self
3.278. reply_to
3.279. resolve
3.280. resume_draft_files
3.281. resume_edited_draft_files
3.282. reverse_alias
3.283. reverse_name
3.284. reverse_realname
3.285. rfc2047_parameters
3.286. save_address
3.287. save_empty
3.288. save_history
3.289. save_name
3.290. score
3.291. score_threshold_delete
3.292. score_threshold_flag
3.293. score_threshold_read
3.294. search_context
3.295. send_charset
3.296. send_multipart_alternative
3.297. send_multipart_alternative_filter
3.298. sendmail
3.299. sendmail_wait
3.300. shell
3.301. sidebar_delim_chars
3.302. sidebar_divider_char
3.303. sidebar_folder_indent
3.304. sidebar_format
3.305. sidebar_indent_string
3.306. sidebar_new_mail_only
3.307. sidebar_next_new_wrap
3.308. sidebar_relative_shortpath_indent
3.309. sidebar_short_path
3.310. sidebar_sort_method
3.311. sidebar_use_mailbox_shortcuts
3.312. sidebar_visible
3.313. sidebar_width
3.314. sig_dashes
3.315. sig_on_top
3.316. signature
3.317. simple_search
3.318. size_show_bytes
3.319. size_show_fractions
3.320. size_show_mb
3.321. size_units_on_left
3.322. sleep_time
3.323. smart_wrap
3.324. smileys
3.325. smime_ask_cert_label
3.326. smime_ca_location
3.327. smime_certificates
3.328. smime_decrypt_command
3.329. smime_decrypt_use_default_key
3.330. smime_default_key
3.331. smime_encrypt_command
3.332. smime_encrypt_with
3.333. smime_get_cert_command
3.334. smime_get_cert_email_command
3.335. smime_get_signer_cert_command
3.336. smime_import_cert_command
3.337. smime_is_default
3.338. smime_keys
3.339. smime_pk7out_command
3.340. smime_self_encrypt
3.341. smime_sign_as
3.342. smime_sign_command
3.343. smime_sign_digest_alg
3.344. smime_sign_opaque_command
3.345. smime_timeout
3.346. smime_verify_command
3.347. smime_verify_opaque_command
3.348. smtp_authenticators
3.349. smtp_oauth_refresh_command
3.350. smtp_pass
3.351. smtp_url
3.352. sort
3.353. sort_alias
3.354. sort_aux
3.355. sort_browser
3.356. sort_re
3.357. spam_separator
3.358. spoolfile
3.359. ssl_ca_certificates_file
3.360. ssl_client_cert
3.361. ssl_force_tls
3.362. ssl_min_dh_prime_bits
3.363. ssl_starttls
3.364. ssl_use_sslv2
3.365. ssl_use_sslv3
3.366. ssl_use_tlsv1
3.367. ssl_use_tlsv1_1
3.368. ssl_use_tlsv1_2
3.369. ssl_use_tlsv1_3
3.370. ssl_usesystemcerts
3.371. ssl_verify_dates
3.372. ssl_verify_host
3.373. ssl_verify_partial_chains
3.374. ssl_ciphers
3.375. status_chars
3.376. status_format
3.377. status_on_top
3.378. strict_threads
3.379. suspend
3.380. text_flowed
3.381. thorough_search
3.382. thread_received
3.383. tilde
3.384. time_inc
3.385. timeout
3.386. tmpdir
3.387. to_chars
3.388. trash
3.389. ts_icon_format
3.390. ts_enabled
3.391. ts_status_format
3.392. tunnel
3.393. tunnel_is_secure
3.394. uncollapse_jump
3.395. uncollapse_new
3.396. use_8bitmime
3.397. use_domain
3.398. use_envelope_from
3.399. use_from
3.400. use_ipv6
3.401. user_agent
3.402. visual
3.403. wait_key
3.404. weed
3.405. wrap
3.406. wrap_headers
3.407. wrap_search
3.408. wrapmargin
3.409. write_bcc
3.410. write_inc
4. Functions
4.1. Generic Menu
4.2. Index Menu
4.3. Pager Menu
4.4. Alias Menu
4.5. Query Menu
4.6. Attachment Menu
4.7. Compose Menu
4.8. Postpone Menu
4.9. Browser Menu
4.10. Pgp Menu
4.11. Smime Menu
4.12. Mixmaster Menu
4.13. Editor Menu
4.14. Autocrypt Account Menu

1. Command-Line Options

Running mutt with no arguments will make Mutt attempt to read your spool mailbox. However, it is possible to read other mailboxes and to send messages from the command line as well.

Table 9.1. Command line options

OptionDescription
-Aexpand an alias
-aattach a file to a message
-bspecify a blind carbon-copy (BCC) address
-cspecify a carbon-copy (Cc) address
-dlog debugging output to ~/.muttdebug0 if mutt was compiled with +DEBUG; it can range from 1-5 and affects verbosity (a value of 2 is recommended)
-Dprint the value of all Mutt variables to stdout
-Eedit the draft (-H) or include (-i) file
-especify a config command to be run after initialization files are read
-fspecify a mailbox to load
-Fspecify an alternate file to read initialization commands
-hprint help on command line options
-Hspecify a draft file from which to read a header and body
-ispecify a file to include in a message composition
-mspecify a default mailbox type
-ndo not read the system Muttrc
-precall a postponed message
-Qquery a configuration variable
-Ropen mailbox in read-only mode
-sspecify a subject (enclose in quotes if it contains spaces)
-vshow version number and compile-time definitions
-xsimulate the mailx(1) compose mode
-yshow a menu containing the files specified by the mailboxes command
-zexit immediately if there are no messages in the mailbox
-Zopen the first folder with new message, exit immediately if none

To read messages in a mailbox

mutt [-nz] [-F muttrc ] [-m type ] [-f mailbox ]

To compose a new message

mutt [-En] [-F muttrc ] [-c address ] [-Hi filename ] [-s subject ] [ -a file [...] -- ] address | mailto_url ...

Mutt also supports a batch mode to send prepared messages. Simply redirect input from the file you wish to send. For example,

mutt -s "data set for run #2" professor@bigschool.edu < ~/run2.dat

will send a message to <professor@bigschool.edu> with a subject of data set for run #2. In the body of the message will be the contents of the file ~/run2.dat.

An include file passed with -i will be used as the body of the message. When combined with -E, the include file will be directly edited during message composition. The file will be modified regardless of whether the message is sent or aborted.

A draft file passed with -H will be used as the initial header and body for the message. Multipart messages can be used as a draft file. When combined with -E, the draft file will be updated to the final state of the message after composition, regardless of whether the message is sent, aborted, or even postponed. Note that if the message is sent encrypted or signed, the draft file will be saved that way too.

All files passed with -a file will be attached as a MIME part to the message. To attach a single or several files, use -- to separate files and recipient addresses:

mutt -a image.png -- some@one.org

or

mutt -a *.png -- some@one.org

Note

The -a option must be last in the option list.

In addition to accepting a list of email addresses, Mutt also accepts a URL with the mailto: schema as specified in RFC2368. This is useful when configuring a web browser to launch Mutt when clicking on mailto links.

mutt mailto:some@one.org?subject=test&cc=other@one.org

2. Configuration Commands

The following are the commands understood by Mutt:

3. Configuration Variables

3.1. abort_noattach

Type: quadoption
Default: no

When the body of the message matches $abort_noattach_regexp and there are no attachments, this quadoption controls whether to abort sending the message.

3.2. abort_noattach_regexp

Type: regular expression
Default: attach

Specifies a regular expression to match against the body of the message, to determine if an attachment was mentioned but mistakenly forgotten. If it matches, $abort_noattach will be consulted to determine if message sending will be aborted.

Like other regular expressions in Mutt, the search is case sensitive if the pattern contains at least one upper case letter, and case insensitive otherwise.

3.3. abort_nosubject

Type: quadoption
Default: ask-yes

If set to yes, when composing messages and no subject is given at the subject prompt, composition will be aborted. If set to no, composing messages with no subject given at the subject prompt will never be aborted.

3.4. abort_unmodified

Type: quadoption
Default: yes

If set to yes, composition will automatically abort after editing the message body if no changes are made to the file (this check only happens after the first edit of the file). When set to no, composition will never be aborted.

3.5. alias_file

Type: path
Default: ~/.muttrc

The default file in which to save aliases created by the <create-alias> function. Entries added to this file are encoded in the character set specified by $config_charset if it is set or the current character set otherwise.

Note: Mutt will not automatically source this file; you must explicitly use the source command for it to be executed in case this option points to a dedicated alias file.

The default for this option is the currently used muttrc file, or ~/.muttrc if no user muttrc was found.

3.6. alias_format

Type: string
Default: %4n %2f %t %-10a   %r

Specifies the format of the data displayed for the alias menu. The following printf(3)-style sequences are available:

%a alias name
%f flags - currently, a d for an alias marked for deletion
%n index number
%r address which alias expands to
%t character which indicates if the alias is tagged for inclusion

3.7. allow_8bit

Type: boolean
Default: yes

Controls whether 8-bit data is converted to 7-bit using either Quoted- Printable or Base64 encoding when sending mail.

3.8. allow_ansi

Type: boolean
Default: no

Controls whether ANSI color codes in messages (and color tags in rich text messages) are to be interpreted. Messages containing these codes are rare, but if this option is set, their text will be colored accordingly. Note that this may override your color choices, and even present a security problem, since a message could include a line like

[-- PGP output follows ...

and give it the same color as your attachment color (see also $crypt_timestamp).

3.9. arrow_cursor

Type: boolean
Default: no

When set, an arrow (->) will be used to indicate the current entry in menus instead of highlighting the whole line. On slow network or modem links this will make response faster because there is less that has to be redrawn on the screen when moving to the next or previous entries in the menu.

3.10. ascii_chars

Type: boolean
Default: no

If set, Mutt will use plain ASCII characters when displaying thread and attachment trees, instead of the default ACS characters.

3.11. askbcc

Type: boolean
Default: no

If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients before editing an outgoing message.

3.12. askcc

Type: boolean
Default: no

If set, Mutt will prompt you for carbon-copy (Cc) recipients before editing the body of an outgoing message.

3.13. assumed_charset

Type: string
Default: (empty)

This variable is a colon-separated list of character encoding schemes for messages without character encoding indication. Header field values and message body content without character encoding indication would be assumed that they are written in one of this list. By default, all the header fields and message body without any charset indication are assumed to be in us-ascii.

For example, Japanese users might prefer this:

set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"

However, only the first content is valid for the message body.

3.14. attach_charset

Type: string
Default: (empty)

This variable is a colon-separated list of character encoding schemes for text file attachments. Mutt uses this setting to guess which encoding files being attached are encoded in to convert them to a proper character set given in $send_charset.

If unset, the value of $charset will be used instead. For example, the following configuration would work for Japanese text handling:

set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"

Note: for Japanese users, iso-2022-* must be put at the head of the value as shown above if included.

3.15. attach_format

Type: string
Default: %u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] 

This variable describes the format of the attachment menu. The following printf(3)-style sequences are understood:

%C charset
%c requires charset conversion (n or c)
%D deleted flag
%d description (if none, falls back to %F)
%e MIME content-transfer-encoding
%F filename in content-disposition header (if none, falls back to %f)
%f filename
%I disposition (I for inline, A for attachment)
%m major MIME type
%M MIME subtype
%n attachment number
%Q Q, if MIME part qualifies for attachment counting
%s size (see formatstrings-size)
%t tagged flag
%T graphic tree characters
%u unlink (=to delete) flag
%X number of qualifying MIME parts in this part and its children (please see the attachments section for possible speed effects)
%>X right justify the rest of the string and pad with character X
%|X pad to the end of the line with character X
%*X soft-fill with character X as pad

For an explanation of soft-fill, see the $index_format documentation.

3.16. attach_save_dir

Type: path
Default: (empty)

The default directory to save attachments from the attachment menu. If it doesn't exist, Mutt will prompt to create the directory before saving.

If the path is invalid (e.g. not a directory, or cannot be chdir'ed to), Mutt will fall back to using the current directory.

3.17. attach_sep

Type: string
Default: \n

The separator to add between attachments when operating (saving, printing, piping, etc) on a list of tagged attachments.

3.18. attach_split

Type: boolean
Default: yes

If this variable is unset, when operating (saving, printing, piping, etc) on a list of tagged attachments, Mutt will concatenate the attachments and will operate on them as a single attachment. The $attach_sep separator is added after each attachment. When set, Mutt will operate on the attachments one by one.

3.19. attribution

Type: string (localized)
Default: On %d, %n wrote:

This is the string that will precede a message which has been included in a reply. For a full listing of defined printf(3)-like sequences see the section on $index_format.

3.20. attribution_locale

Type: string
Default: (empty)

The locale used by strftime(3) to format dates in the attribution string. Legal values are the strings your system accepts for the locale environment variable $LC_TIME.

This variable is to allow the attribution date format to be customized by recipient or folder using hooks. By default, Mutt will use your locale environment, so there is no need to set this except to override that default.

3.21. auto_subscribe

Type: boolean
Default: no

When set, Mutt assumes the presence of a List-Post header means the recipient is subscribed to the list. Unless the mailing list is in the unsubscribe or unlist lists, it will be added to the subscribe list. Parsing and checking these things slows header reading down, so this option is disabled by default.

3.22. auto_tag

Type: boolean
Default: no

When set, functions in the index menu which affect a message will be applied to all tagged messages (if there are any). When unset, you must first use the <tag-prefix> function (bound to ; by default) to make the next function apply to all tagged messages.

3.23. autocrypt

Type: boolean
Default: no

When set, enables autocrypt, which provides passive encryption protection with keys exchanged via headers. See autocryptdoc for more details. (Autocrypt only)

3.24. autocrypt_acct_format

Type: string
Default: %4n %-30a %20p %10s

This variable describes the format of the autocrypt account menu. The following printf(3)-style sequences are understood

%a email address
%k gpg keyid
%n current entry number
%p prefer-encrypt flag
%s status flag (active/inactive)

(Autocrypt only)

3.25. autocrypt_dir

Type: path
Default: ~/.mutt/autocrypt

This variable sets where autocrypt files are stored, including the GPG keyring and sqlite database. See autocryptdoc for more details. (Autocrypt only)

3.26. autocrypt_reply

Type: boolean
Default: yes

When set, replying to an autocrypt email automatically enables autocrypt in the reply. You may want to unset this if you're using the same key for autocrypt as normal web-of-trust, so that autocrypt isn't forced on for all encrypted replies. (Autocrypt only)

3.27. autoedit

Type: boolean
Default: no

When set along with $edit_headers, Mutt will skip the initial send-menu (prompting for subject and recipients) and allow you to immediately begin editing the body of your message. The send-menu may still be accessed once you have finished editing the body of your message.

Note: when this option is set, you cannot use send-hooks that depend on the recipients when composing a new (non-reply) message, as the initial list of recipients is empty.

Also see $fast_reply.

3.28. background_edit

Type: boolean
Default: no

When set, Mutt will run $editor in the background during message composition. A landing page will display, waiting for the $editor to exit. The landing page may be exited, allowing perusal of the mailbox, or even for other messages to be composed. Backgrounded sessions may be returned to via the <background-compose-menu> function.

For background editing to work properly, $editor must be set to an editor that does not try to use the Mutt terminal: for example a graphical editor, or a script launching (and waiting for) the editor in another Gnu Screen window.

For more details, see bgedit ("Background Editing" in the manual).

3.29. background_confirm_quit

Type: boolean
Default: yes

When set, if there are any background edit sessions, you will be prompted to confirm exiting Mutt, in addition to the $quit prompt.

3.30. background_format

Type: string
Default: %10S %7p %s

This variable describes the format of the background compose menu. The following printf(3)-style sequences are understood:

%i parent message id (for replies and forwarded messages)
%n the running number on the menu
%p pid of the $editor process
%r comma separated list of To: recipients
%R comma separated list of Cc: recipients
%s subject of the message
%S status of the $editor process: running/finished

3.31. beep

Type: boolean
Default: yes

When this variable is set, mutt will beep when an error occurs.

3.32. beep_new

Type: boolean
Default: no

When this variable is set, mutt will beep whenever it prints a message notifying you of new mail. This is independent of the setting of the $beep variable.

3.33. bounce

Type: quadoption
Default: ask-yes

Controls whether you will be asked to confirm bouncing messages. If set to yes you don't get asked if you want to bounce a message. Setting this variable to no is not generally useful, and thus not recommended, because you are unable to bounce messages.

3.34. bounce_delivered

Type: boolean
Default: yes

When this variable is set, mutt will include Delivered-To headers when bouncing messages. Postfix users may wish to unset this variable.

3.35. braille_friendly

Type: boolean
Default: no

When this variable is set, mutt will place the cursor at the beginning of the current line in menus, even when the $arrow_cursor variable is unset, making it easier for blind persons using Braille displays to follow these menus. The option is unset by default because many visual terminals don't permit making the cursor invisible.

3.36. browser_abbreviate_mailboxes

Type: boolean
Default: yes

When this variable is set, mutt will abbreviate mailbox names in the browser mailbox list, using '~' and '=' shortcuts.

The default "alpha" setting of $sort_browser uses locale-based sorting (using strcoll(3)), which ignores some punctuation. This can lead to some situations where the order doesn't make intuitive sense. In those cases, it may be desirable to unset this variable.

3.37. browser_sticky_cursor

Type: boolean
Default: yes

When this variable is set, the browser will attempt to keep the cursor on the same mailbox when performing various functions. These include moving up a directory, toggling between mailboxes and directory listing, creating/renaming a mailbox, toggling subscribed mailboxes, and entering a new mask.

3.38. certificate_file

Type: path
Default: ~/.mutt_certificates

This variable specifies the file where the certificates you trust are saved. When an unknown certificate is encountered, you are asked if you accept it or not. If you accept it, the certificate can also be saved in this file and further connections are automatically accepted.

You can also manually add CA certificates in this file. Any server certificate that is signed with one of these CA certificates is also automatically accepted.

Example:

set certificate_file=~/.mutt/certificates

3.39. change_folder_next

Type: boolean
Default: no

When this variable is set, the <change-folder> function mailbox suggestion will start at the next folder in your mailboxes list, instead of starting at the first folder in the list.

3.40. charset

Type: string
Default: (empty)

Character set your terminal uses to display and enter textual data. It is also the fallback for $send_charset.

Upon startup Mutt tries to derive this value from environment variables such as $LC_CTYPE or $LANG.

Note: It should only be set in case Mutt isn't able to determine the character set used correctly.

3.41. check_mbox_size

Type: boolean
Default: no

When this variable is set, mutt will use file size attribute instead of access time when checking for new mail in mbox and mmdf folders.

This variable is unset by default and should only be enabled when new mail detection for these folder types is unreliable or doesn't work.

Note that enabling this variable should happen before any mailboxes directives occur in configuration files regarding mbox or mmdf folders because mutt needs to determine the initial new mail status of such a mailbox by performing a fast mailbox scan when it is defined. Afterwards the new mail status is tracked by file size changes.

3.42. check_new

Type: boolean
Default: yes

Note: this option only affects maildir and MH style mailboxes.

When set, Mutt will check for new mail delivered while the mailbox is open. Especially with MH mailboxes, this operation can take quite some time since it involves scanning the directory and checking each file to see if it has already been looked at. If this variable is unset, no check for new mail is performed while the mailbox is open.

3.43. collapse_unread

Type: boolean
Default: yes

When unset, Mutt will not collapse a thread if it contains any unread messages.

3.44. compose_format

Type: string (localized)
Default: -- Mutt: Compose  [Approx. msg size: %l   Atts: %a]%>-

Controls the format of the status line displayed in the compose menu. This string is similar to $status_format, but has its own set of printf(3)-like sequences:

%a total number of attachments
%h local hostname
%l approximate size (in bytes) of the current message (see formatstrings-size)
%v Mutt version string

See the text describing the $status_format option for more information on how to set $compose_format.

3.45. config_charset

Type: string
Default: (empty)

When defined, Mutt will recode commands in rc files from this encoding to the current character set as specified by $charset and aliases written to $alias_file from the current character set.

Please note that if setting $charset it must be done before setting $config_charset.

Recoding should be avoided as it may render unconvertable characters as question marks which can lead to undesired side effects (for example in regular expressions).

3.46. confirmappend

Type: boolean
Default: yes

When set, Mutt will prompt for confirmation when appending messages to an existing mailbox.

3.47. confirmcreate

Type: boolean
Default: yes

When set, Mutt will prompt for confirmation when saving messages to a mailbox which does not yet exist before creating it.

3.48. connect_timeout

Type: number
Default: 30

Causes Mutt to timeout a network connection (for IMAP, POP or SMTP) after this many seconds if the connection is not able to be established. A negative value causes Mutt to wait indefinitely for the connection attempt to succeed.

3.49. content_type

Type: string
Default: text/plain

Sets the default Content-Type for the body of newly composed messages.

3.50. copy

Type: quadoption
Default: yes

This variable controls whether or not copies of your outgoing messages will be saved for later references. Also see $record, $save_name, $force_name and fcc-hook.

3.51. copy_decode_weed

Type: boolean
Default: no

Controls whether Mutt will weed headers when invoking the <decode-copy> or <decode-save> functions.

3.52. count_alternatives

Type: boolean
Default: no

When set, Mutt will recurse inside multipart/alternatives while performing attachment searching and counting (see attachments).

Traditionally, multipart/alternative parts have simply represented different encodings of the main content of the email. Unfortunately, some mail clients have started to place email attachments inside one of alternatives. Setting this will allow Mutt to find and count matching attachments hidden there, and include them in the index via %X or through ~X pattern matching.

3.53. cursor_overlay

Type: boolean
Default: no

When set, Mutt will overlay the indicator, tree, sidebar_highlight, and sidebar_indicator colors onto the currently selected line. This will allow default colors in those to be overridden, and for attributes to be merged between the layers.

3.54. crypt_autoencrypt

Type: boolean
Default: no

Setting this variable will cause Mutt to always attempt to PGP encrypt outgoing messages. This is probably only useful in connection to the send-hook command. It can be overridden by use of the pgp menu, when encryption is not required or signing is requested as well. If $smime_is_default is set, then OpenSSL is used instead to create S/MIME messages and settings can be overridden by use of the smime menu instead. (Crypto only)

3.55. crypt_autopgp

Type: boolean
Default: yes

This variable controls whether or not mutt may automatically enable PGP encryption/signing for messages. See also $crypt_autoencrypt, $crypt_replyencrypt, $crypt_autosign, $crypt_replysign and $smime_is_default.

3.56. crypt_autosign

Type: boolean
Default: no

Setting this variable will cause Mutt to always attempt to cryptographically sign outgoing messages. This can be overridden by use of the pgp menu, when signing is not required or encryption is requested as well. If $smime_is_default is set, then OpenSSL is used instead to create S/MIME messages and settings can be overridden by use of the smime menu instead of the pgp menu. (Crypto only)

3.57. crypt_autosmime

Type: boolean
Default: yes

This variable controls whether or not mutt may automatically enable S/MIME encryption/signing for messages. See also $crypt_autoencrypt, $crypt_replyencrypt, $crypt_autosign, $crypt_replysign and $smime_is_default.

3.58. crypt_confirmhook

Type: boolean
Default: yes

If set, then you will be prompted for confirmation of keys when using the crypt-hook command. If unset, no such confirmation prompt will be presented. This is generally considered unsafe, especially where typos are concerned.

3.59. crypt_opportunistic_encrypt

Type: boolean
Default: no

Setting this variable will cause Mutt to automatically enable and disable encryption, based on whether all message recipient keys can be located by Mutt.

When this option is enabled, Mutt will enable/disable encryption each time the TO, CC, and BCC lists are edited. If $edit_headers is set, Mutt will also do so each time the message is edited.

While this is set, encryption can't be manually enabled/disabled. The pgp or smime menus provide a selection to temporarily disable this option for the current message.

If $crypt_autoencrypt or $crypt_replyencrypt enable encryption for a message, this option will be disabled for that message. It can be manually re-enabled in the pgp or smime menus. (Crypto only)

3.60. crypt_opportunistic_encrypt_strong_keys

Type: boolean
Default: no

When set, this modifies the behavior of $crypt_opportunistic_encrypt to only search for "strong keys", that is, keys with full validity according to the web-of-trust algorithm. A key with marginal or no validity will not enable opportunistic encryption.

For S/MIME, the behavior depends on the backend. Classic S/MIME will filter for certificates with the 't' (trusted) flag in the .index file. The GPGME backend will use the same filters as with OpenPGP, and depends on GPGME's logic for assigning the GPGME_VALIDITY_FULL and GPGME_VALIDITY_ULTIMATE validity flag.

3.61. crypt_protected_headers_read

Type: boolean
Default: yes

When set, Mutt will display protected headers in the pager, and will update the index and header cache with revised headers. Protected headers are stored inside the encrypted or signed part of an an email, to prevent disclosure or tampering. For more information see https://github.com/autocrypt/protected-headers. Currently Mutt only supports the Subject header.

Encrypted messages using protected headers often substitute the exposed Subject header with a dummy value (see $crypt_protected_headers_subject). Mutt will update its concept of the correct subject after the message is opened, i.e. via the <display-message> function. If you reply to a message before opening it, Mutt will end up using the dummy Subject header, so be sure to open such a message first. (Crypto only)

3.62. crypt_protected_headers_save

Type: boolean
Default: no

When $crypt_protected_headers_read is set, and a message with a protected Subject is opened, Mutt will save the updated Subject into the header cache by default. This allows searching/limiting based on the protected Subject header if the mailbox is re-opened, without having to re-open the message each time. However, for mbox/mh mailbox types, or if header caching is not set up, you would need to re-open the message each time the mailbox was reopened before you could see or search/limit on the protected subject again.

When this variable is set, Mutt additionally saves the protected Subject back in the clear-text message headers. This provides better usability, but with the tradeoff of reduced security. The protected Subject header, which may have previously been encrypted, is now stored in clear-text in the message headers. Copying the message elsewhere, via Mutt or external tools, could expose this previously encrypted data. Please make sure you understand the consequences of this before you enable this variable. (Crypto only)

3.63. crypt_protected_headers_subject

Type: string
Default: ...

When $crypt_protected_headers_write is set, and the message is marked for encryption, this will be substituted into the Subject field in the message headers. To prevent a subject from being substituted, unset this variable, or set it to the empty string. (Crypto only)

3.64. crypt_protected_headers_write

Type: boolean
Default: no

When set, Mutt will generate protected headers for signed and encrypted emails. Protected headers are stored inside the encrypted or signed part of an an email, to prevent disclosure or tampering. For more information see https://github.com/autocrypt/protected-headers. Currently Mutt only supports the Subject header. (Crypto only)

3.65. crypt_replyencrypt

Type: boolean
Default: yes

If set, automatically PGP or OpenSSL encrypt replies to messages which are encrypted. (Crypto only)

3.66. crypt_replysign

Type: boolean
Default: no

If set, automatically PGP or OpenSSL sign replies to messages which are signed.

Note: this does not work on messages that are encrypted and signed! (Crypto only)

3.67. crypt_replysignencrypted

Type: boolean
Default: no

If set, automatically PGP or OpenSSL sign replies to messages which are encrypted. This makes sense in combination with $crypt_replyencrypt, because it allows you to sign all messages which are automatically encrypted. This works around the problem noted in $crypt_replysign, that mutt is not able to find out whether an encrypted message is also signed. (Crypto only)

3.68. crypt_timestamp

Type: boolean
Default: yes

If set, mutt will include a time stamp in the lines surrounding PGP or S/MIME output, so spoofing such lines is more difficult. If you are using colors to mark these lines, and rely on these, you may unset this setting. (Crypto only)

3.69. crypt_use_gpgme

Type: boolean
Default: no

This variable controls the use of the GPGME-enabled crypto backends. If it is set and Mutt was built with gpgme support, the gpgme code for S/MIME and PGP will be used instead of the classic code. Note that you need to set this option in .muttrc; it won't have any effect when used interactively.

Note that the GPGME backend does not support creating old-style inline (traditional) PGP encrypted or signed messages (see $pgp_autoinline).

3.70. crypt_use_pka

Type: boolean
Default: no

Controls whether mutt uses PKA (see http://www.g10code.de/docs/pka-intro.de.pdf) during signature verification (only supported by the GPGME backend).

3.71. crypt_verify_sig

Type: quadoption
Default: yes

If yes, always attempt to verify PGP or S/MIME signatures. If ask-*, ask whether or not to verify the signature. If no, never attempt to verify cryptographic signatures. (Crypto only)

3.72. date_format

Type: string
Default: !%a, %b %d, %Y at %I:%M:%S%p %Z

This variable controls the format of the date printed by the %d sequence in $index_format. This is passed to the strftime(3) function to process the date, see the man page for the proper syntax.

Unless the first character in the string is a bang (!), the month and week day names are expanded according to the locale. If the first character in the string is a bang, the bang is discarded, and the month and week day names in the rest of the string are expanded in the C locale (that is in US English).

3.73. default_hook

Type: string
Default: ~f %s !~P | (~P ~C %s)

This variable controls how message-hook, reply-hook, send-hook, send2-hook, save-hook, and fcc-hook will be interpreted if they are specified with only a simple regexp, instead of a matching pattern. The hooks are expanded when they are declared, so a hook will be interpreted according to the value of this variable at the time the hook is declared.

The default value matches if the message is either from a user matching the regular expression given, or if it is from you (if the from address matches alternates) and is to or cc'ed to a user matching the given regular expression.

3.74. delete

Type: quadoption
Default: ask-yes

Controls whether or not messages are really deleted when closing or synchronizing a mailbox. If set to yes, messages marked for deleting will automatically be purged without prompting. If set to no, messages marked for deletion will be kept in the mailbox.

3.75. delete_untag

Type: boolean
Default: yes

If this option is set, mutt will untag messages when marking them for deletion. This applies when you either explicitly delete a message, or when you save it to another folder.

3.76. digest_collapse

Type: boolean
Default: yes

If this option is set, mutt's received-attachments menu will not show the subparts of individual messages in a multipart/digest. To see these subparts, press v on that menu.

3.77. display_filter

Type: path
Default: (empty)

When set, specifies a command used to filter messages. When a message is viewed it is passed as standard input to $display_filter, and the filtered message is read from the standard output.

3.78. dotlock_program

Type: path
Default: /usr/bin/mutt_dotlock

Contains the path of the mutt_dotlock(1) binary to be used by mutt.

3.79. dsn_notify

Type: string
Default: (empty)

This variable sets the request for when notification is returned. The string consists of a comma separated list (no spaces!) of one or more of the following: never, to never request notification, failure, to request notification on transmission failure, delay, to be notified of message delays, success, to be notified of successful transmission.

Example:

set dsn_notify="failure,delay"

Note: when using $sendmail for delivery, you should not enable this unless you are either using Sendmail 8.8.x or greater or a MTA providing a sendmail(1)-compatible interface supporting the -N option for DSN. For SMTP delivery, DSN support is auto-detected so that it depends on the server whether DSN will be used or not.

3.80. dsn_return

Type: string
Default: (empty)

This variable controls how much of your message is returned in DSN messages. It may be set to either hdrs to return just the message header, or full to return the full message.

Example:

set dsn_return=hdrs

Note: when using $sendmail for delivery, you should not enable this unless you are either using Sendmail 8.8.x or greater or a MTA providing a sendmail(1)-compatible interface supporting the -R option for DSN. For SMTP delivery, DSN support is auto-detected so that it depends on the server whether DSN will be used or not.

3.81. duplicate_threads

Type: boolean
Default: yes

This variable controls whether mutt, when $sort is set to threads, threads messages with the same Message-Id together. If it is set, it will indicate that it thinks they are duplicates of each other with an equals sign in the thread tree.

3.82. edit_headers

Type: boolean
Default: no

This option allows you to edit the header of your outgoing messages along with the body of your message.

Although the compose menu may have localized header labels, the labels passed to your editor will be standard RFC 2822 headers, (e.g. To:, Cc:, Subject:). Headers added in your editor must also be RFC 2822 headers, or one of the pseudo headers listed in edit-header. Mutt will not understand localized header labels, just as it would not when parsing an actual email.

Note that changes made to the References: and Date: headers are ignored for interoperability reasons.

3.83. editor

Type: path
Default: (empty)

This variable specifies which editor is used by mutt. It defaults to the value of the $VISUAL, or $EDITOR, environment variable, or to the string vi if neither of those are set.

The $editor string may contain a %s escape, which will be replaced by the name of the file to be edited. If the %s escape does not appear in $editor, a space and the name to be edited are appended.

The resulting string is then executed by running

sh -c 'string'

where string is the expansion of $editor described above.

3.84. encode_from

Type: boolean
Default: no

When set, mutt will quoted-printable encode messages when they contain the string From (note the trailing space) in the beginning of a line. This is useful to avoid the tampering certain mail delivery and transport agents tend to do with messages (in order to prevent tools from misinterpreting the line as a mbox message separator).

3.85. entropy_file

Type: path
Default: (empty)

The file which includes random data that is used to initialize SSL library functions.

3.86. envelope_from_address

Type: e-mail address
Default: (empty)

Manually sets the envelope sender for outgoing messages. This value is ignored if $use_envelope_from is unset.

3.87. error_history

Type: number
Default: 30

This variable controls the size (in number of strings remembered) of the error messages displayed by mutt. These can be shown with the <error-history> function. The history is cleared each time this variable is set.

3.88. escape

Type: string
Default: ~

Escape character to use for functions in the built-in editor.

3.89. fast_reply

Type: boolean
Default: no

When set, the initial prompt for recipients and subject are skipped when replying to messages, and the initial prompt for subject is skipped when forwarding messages.

Note: this variable has no effect when the $autoedit variable is set.

3.90. fcc_attach

Type: quadoption
Default: yes

This variable controls whether or not attachments on outgoing messages are saved along with the main body of your message.

3.91. fcc_before_send

Type: boolean
Default: no

When this variable is set, FCCs will occur before sending the message. Before sending, the message cannot be manipulated, so it will be stored the exact same as sent: $fcc_attach and $fcc_clear will be ignored (using their default values).

When unset, the default, FCCs will occur after sending. Variables $fcc_attach and $fcc_clear will be respected, allowing it to be stored without attachments or encryption/signing if desired.

3.92. fcc_clear

Type: boolean
Default: no

When this variable is set, FCCs will be stored unencrypted and unsigned, even when the actual message is encrypted and/or signed. (PGP only)

3.93. fcc_delimiter

Type: string
Default: (empty)

When specified, this allows the ability to Fcc to more than one mailbox. The fcc value will be split by this delimiter and Mutt will evaluate each part as a mailbox separately.

See $record, fcc-hook, and fcc-save-hook.

3.94. flag_safe

Type: boolean
Default: no

If set, flagged messages cannot be deleted.

3.95. folder

Type: path
Default: ~/Mail

Specifies the default location of your mailboxes. A + or = at the beginning of a pathname will be expanded to the value of this variable. Note that if you change this variable (from the default) value you need to make sure that the assignment occurs before you use + or = for any other variables since expansion takes place when handling the mailboxes command.

3.96. folder_format

Type: string
Default: %2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f

This variable allows you to customize the file browser display to your personal taste. This string is similar to $index_format, but has its own set of printf(3)-like sequences:

%C current file number
%d date/time folder was last modified
%D date/time folder was last modified using $date_format.
%f filename (/ is appended to directory names, @ to symbolic links and * to executable files)
%F file permissions
%g group name (or numeric gid, if missing)
%l number of hard links
%m number of messages in the mailbox *
%n number of unread messages in the mailbox *
%N N if mailbox has new mail, blank otherwise
%s size in bytes (see formatstrings-size)
%t * if the file is tagged, blank otherwise
%u owner name (or numeric uid, if missing)
%>X right justify the rest of the string and pad with character X
%|X pad to the end of the line with character X
%*X soft-fill with character X as pad

For an explanation of soft-fill, see the $index_format documentation.

* = can be optionally printed if nonzero

%m, %n, and %N only work for monitored mailboxes. %m requires $mail_check_stats to be set. %n requires $mail_check_stats to be set (except for IMAP mailboxes).

3.97. followup_to

Type: boolean
Default: yes

Controls whether or not the Mail-Followup-To: header field is generated when sending mail. When set, Mutt will generate this field when you are replying to a known mailing list, specified with the subscribe or lists commands.

This field has two purposes. First, preventing you from receiving duplicate copies of replies to messages which you send to mailing lists, and second, ensuring that you do get a reply separately for any messages sent to known lists to which you are not subscribed.

The header will contain only the list's address for subscribed lists, and both the list address and your own email address for unsubscribed lists. Without this header, a group reply to your message sent to a subscribed list will be sent to both the list and your address, resulting in two copies of the same email for you.

3.98. force_name

Type: boolean
Default: no

This variable is similar to $save_name, except that Mutt will store a copy of your outgoing message by the username of the address you are sending to even if that mailbox does not exist.

Also see the $record variable.

3.99. forward_attachments

Type: quadoption
Default: ask-yes

When forwarding inline (i.e. $mime_forward unset or answered with no and $forward_decode set), attachments which cannot be decoded in a reasonable manner will be attached to the newly composed message if this quadoption is set or answered with yes.

3.100. forward_attribution_intro

Type: string (localized)
Default: ----- Forwarded message from %f -----

This is the string that will precede a message which has been forwarded in the main body of a message (when $mime_forward is unset). For a full listing of defined printf(3)-like sequences see the section on $index_format. See also $attribution_locale.

3.101. forward_attribution_trailer

Type: string (localized)
Default: ----- End forwarded message -----

This is the string that will follow a message which has been forwarded in the main body of a message (when $mime_forward is unset). For a full listing of defined printf(3)-like sequences see the section on $index_format. See also $attribution_locale.

3.102. forward_decode

Type: boolean
Default: yes

Controls the decoding of complex MIME messages into text/plain when forwarding a message. The message header is also RFC2047 decoded. This variable is only used, if $mime_forward is unset, otherwise $mime_forward_decode is used instead.

3.103. forward_decrypt

Type: boolean
Default: yes

Controls the handling of encrypted messages when forwarding a message. When set, the outer layer of encryption is stripped off. This variable is only used if $mime_forward is set and $mime_forward_decode is unset. (PGP only)

3.104. forward_edit

Type: quadoption
Default: yes

This quadoption controls whether or not the user is automatically placed in the editor when forwarding messages. For those who always want to forward with no modification, use a setting of no.

3.105. forward_format

Type: string
Default: [%a: %s]

This variable controls the default subject when forwarding a message. It uses the same format sequences as the $index_format variable.

3.106. forward_quote

Type: boolean
Default: no

When set, forwarded messages included in the main body of the message (when $mime_forward is unset) will be quoted using $indent_string.

3.107. from

Type: e-mail address
Default: (empty)

When set, this variable contains a default from address. It can be overridden using my_hdr (including from a send-hook) and $reverse_name. This variable is ignored if $use_from is unset.

This setting defaults to the contents of the environment variable $EMAIL.

3.108. gecos_mask

Type: regular expression
Default: ^[^,]*

A regular expression used by mutt to parse the GECOS field of a password entry when expanding the alias. The default value will return the string up to the first , encountered. If the GECOS field contains a string like lastname, firstname then you should set it to .*.

This can be useful if you see the following behavior: you address an e-mail to user ID stevef whose full name is Steve Franklin. If mutt expands stevef to "Franklin" stevef@foo.bar then you should set the $gecos_mask to a regular expression that will match the whole name so mutt will expand Franklin to Franklin, Steve.

3.109. hdrs

Type: boolean
Default: yes

When unset, the header fields normally added by the my_hdr command are not created. This variable must be unset before composing a new message or replying in order to take effect. If set, the user defined header fields are added to every new message.

3.110. header

Type: boolean
Default: no

When set, this variable causes Mutt to include the header of the message you are replying to into the edit buffer. The $weed setting applies.

3.111. header_cache

Type: path
Default: (empty)

This variable points to the header cache database. If pointing to a directory Mutt will contain a header cache database file per folder, if pointing to a file that file will be a single global header cache. By default it is unset so no header caching will be used.

Header caching can greatly improve speed when opening POP, IMAP MH or Maildir folders, see caching for details.

3.112. header_cache_compress

Type: boolean
Default: yes

When mutt is compiled with qdbm, tokyocabinet, or kyotocabinet as header cache backend, this option determines whether the database will be compressed. Compression results in database files roughly being one fifth of the usual diskspace, but the decompression can result in a slower opening of cached folder(s) which in general is still much faster than opening non header cached folders.

3.113. header_cache_pagesize

Type: number (long)
Default: 16384

When mutt is compiled with either gdbm or bdb4 as the header cache backend, this option changes the database page size. Too large or too small values can waste space, memory, or CPU time. The default should be more or less optimal for most use cases.

3.114. header_color_partial

Type: boolean
Default: no

When set, color header regexps behave like color body regexps: color is applied to the exact text matched by the regexp. When unset, color is applied to the entire header.

One use of this option might be to apply color to just the header labels.

See color for more details.

3.115. help

Type: boolean
Default: yes

When set, help lines describing the bindings for the major functions provided by each menu are displayed on the first line of the screen.

Note: The binding will not be displayed correctly if the function is bound to a sequence rather than a single keystroke. Also, the help line may not be updated if a binding is changed while Mutt is running. Since this variable is primarily aimed at new users, neither of these should present a major problem.

3.116. hidden_host

Type: boolean
Default: no

When set, mutt will skip the host name part of $hostname variable when adding the domain part to addresses. This variable does not affect the generation of Message-IDs, and it will not lead to the cut-off of first-level domains.

3.117. hide_limited

Type: boolean
Default: no

When set, mutt will not show the presence of messages that are hidden by limiting, in the thread tree.

3.118. hide_missing

Type: boolean
Default: yes

When set, mutt will not show the presence of missing messages in the thread tree.

3.119. hide_thread_subject

Type: boolean
Default: yes

When set, mutt will not show the subject of messages in the thread tree that have the same subject as their parent or closest previously displayed sibling.

3.120. hide_top_limited

Type: boolean
Default: no

When set, mutt will not show the presence of messages that are hidden by limiting, at the top of threads in the thread tree. Note that when $hide_limited is set, this option will have no effect.

3.121. hide_top_missing

Type: boolean
Default: yes

When set, mutt will not show the presence of missing messages at the top of threads in the thread tree. Note that when $hide_missing is set, this option will have no effect.

3.122. history

Type: number
Default: 10

This variable controls the size (in number of strings remembered) of the string history buffer per category. The buffer is cleared each time the variable is set.

3.123. history_file

Type: path
Default: ~/.mutthistory

The file in which Mutt will save its history.

Also see $save_history.

3.124. history_remove_dups

Type: boolean
Default: no

When set, all of the string history will be scanned for duplicates when a new entry is added. Duplicate entries in the $history_file will also be removed when it is periodically compacted.

3.125. honor_disposition

Type: boolean
Default: no

When set, Mutt will not display attachments with a disposition of attachment inline even if it could render the part to plain text. These MIME parts can only be viewed from the attachment menu.

If unset, Mutt will render all MIME parts it can properly transform to plain text.

3.126. honor_followup_to

Type: quadoption
Default: yes

This variable controls whether or not a Mail-Followup-To header is honored when group-replying to a message.

3.127. hostname

Type: string
Default: (empty)

Specifies the fully-qualified hostname of the system mutt is running on containing the host's name and the DNS domain it belongs to. It is used as the domain part (after @) for local email addresses as well as Message-Id headers.

Its value is determined at startup as follows: the node's hostname is first determined by the uname(3) function. The domain is then looked up using the gethostname(2) and getaddrinfo(3) functions. If those calls are unable to determine the domain, the full value returned by uname is used. Optionally, Mutt can be compiled with a fixed domain name in which case a detected one is not used.

Starting in Mutt 2.0, the operations described in the previous paragraph are performed after the muttrc is processed, instead of beforehand. This way, if the DNS operations are creating delays at startup, you can avoid those by manually setting the value in your muttrc.

Also see $use_domain and $hidden_host.

3.128. idn_decode

Type: boolean
Default: yes

When set, Mutt will show you international domain names decoded. Note: You can use IDNs for addresses even if this is unset. This variable only affects decoding. (IDN only)

3.129. idn_encode

Type: boolean
Default: yes

When set, Mutt will encode international domain names using IDN. Unset this if your SMTP server can handle newer (RFC 6531) UTF-8 encoded domains. (IDN only)

3.130. ignore_linear_white_space

Type: boolean
Default: no

This option replaces linear-white-space between encoded-word and text to a single space to prevent the display of MIME-encoded Subject: field from being divided into multiple lines.

3.131. ignore_list_reply_to

Type: boolean
Default: no

Affects the behavior of the <reply> function when replying to messages from mailing lists (as defined by the subscribe or lists commands). When set, if the Reply-To: field is set to the same value as the To: field, Mutt assumes that the Reply-To: field was set by the mailing list to automate responses to the list, and will ignore this field. To direct a response to the mailing list when this option is set, use the <list-reply> function; <group-reply> will reply to both the sender and the list.

3.132. imap_authenticators

Type: string
Default: (empty)

This is a colon-delimited list of authentication methods mutt may attempt to use to log in to an IMAP server, in the order mutt should try them. Authentication methods are either login or the right side of an IMAP AUTH=xxx capability string, e.g. digest-md5, gssapi or cram-md5. This option is case-insensitive. If it's unset (the default) mutt will try all available methods, in order from most-secure to least-secure.

Example:

set imap_authenticators="gssapi:cram-md5:login"

Note: Mutt will only fall back to other authentication methods if the previous methods are unavailable. If a method is available but authentication fails, mutt will not connect to the IMAP server.

3.133. imap_check_subscribed

Type: boolean
Default: no

When set, mutt will fetch the set of subscribed folders from your server on connection, and add them to the set of mailboxes it polls for new mail just as if you had issued individual mailboxes commands.

3.134. imap_condstore

Type: boolean
Default: no

When set, mutt will use the CONDSTORE extension (RFC 7162) if advertised by the server. Mutt's current implementation is basic, used only for initial message fetching and flag updates.

For some IMAP servers, enabling this will slightly speed up downloading initial messages. Unfortunately, Gmail is not one those, and displays worse performance when enabled. Your mileage may vary.

3.135. imap_deflate

Type: boolean
Default: no

When set, mutt will use the COMPRESS=DEFLATE extension (RFC 4978) if advertised by the server.

In general a good compression efficiency can be achieved, which speeds up reading large mailboxes also on fairly good connections.

3.136. imap_delim_chars

Type: string
Default: /.

This contains the list of characters which you would like to treat as folder separators for displaying IMAP paths. In particular it helps in using the = shortcut for your folder variable.

3.137. imap_fetch_chunk_size

Type: number (long)
Default: 0

When set to a value greater than 0, new headers will be downloaded in groups of this many headers per request. If you have a very large mailbox, this might prevent a timeout and disconnect when opening the mailbox, by sending a FETCH per set of this many headers, instead of a single FETCH for all new headers.

3.138. imap_headers

Type: string
Default: (empty)

Mutt requests these header fields in addition to the default headers (Date:, From:, Sender:, Subject:, To:, Cc:, Message-Id:, References:, Content-Type:, Content-Description:, In-Reply-To:, Reply-To:, Lines:, List-Post:, X-Label:) from IMAP servers before displaying the index menu. You may want to add more headers for spam detection.

Note: This is a space separated list, items should be uppercase and not contain the colon, e.g. X-BOGOSITY X-SPAM-STATUS for the X-Bogosity: and X-Spam-Status: header fields.

3.139. imap_idle

Type: boolean
Default: no

When set, mutt will attempt to use the IMAP IDLE extension to check for new mail in the current mailbox. Some servers (dovecot was the inspiration for this option) react badly to mutt's implementation. If your connection seems to freeze up periodically, try unsetting this.

3.140. imap_keepalive

Type: number
Default: 300

This variable specifies the maximum amount of time in seconds that mutt will wait before polling open IMAP connections, to prevent the server from closing them before mutt has finished with them. The default is well within the RFC-specified minimum amount of time (30 minutes) before a server is allowed to do this, but in practice the RFC does get violated every now and then. Reduce this number if you find yourself getting disconnected from your IMAP server due to inactivity.

3.141. imap_list_subscribed

Type: boolean
Default: no

This variable configures whether IMAP folder browsing will look for only subscribed folders or all folders. This can be toggled in the IMAP browser with the <toggle-subscribed> function.

3.142. imap_login

Type: string
Default: (empty)

Your login name on the IMAP server.

This variable defaults to the value of $imap_user.

3.143. imap_oauth_refresh_command

Type: string
Default: (empty)

The command to run to generate an OAUTH refresh token for authorizing your connection to your IMAP server. This command will be run on every connection attempt that uses the OAUTHBEARER authentication mechanism. See oauth for details.

3.144. imap_pass

Type: string
Default: (empty)

Specifies the password for your IMAP account. If unset, Mutt will prompt you for your password when you invoke the <imap-fetch-mail> function or try to open an IMAP folder.

Warning: you should only use this option when you are on a fairly secure machine, because the superuser can read your muttrc even if you are the only one who can read the file.

3.145. imap_passive

Type: boolean
Default: yes

When set, mutt will not open new IMAP connections to check for new mail. Mutt will only check for new mail over existing IMAP connections. This is useful if you don't want to be prompted for user/password pairs on mutt invocation, or if opening the connection is slow.

3.146. imap_peek

Type: boolean
Default: yes

When set, mutt will avoid implicitly marking your mail as read whenever you fetch a message from the server. This is generally a good thing, but can make closing an IMAP folder somewhat slower. This option exists to appease speed freaks.

3.147. imap_pipeline_depth

Type: number
Default: 15

Controls the number of IMAP commands that may be queued up before they are sent to the server. A deeper pipeline reduces the amount of time mutt must wait for the server, and can make IMAP servers feel much more responsive. But not all servers correctly handle pipelined commands, so if you have problems you might want to try setting this variable to 0.

Note: Changes to this variable have no effect on open connections.

3.148. imap_poll_timeout

Type: number
Default: 15

This variable specifies the maximum amount of time in seconds that mutt will wait for a response when polling IMAP connections for new mail, before timing out and closing the connection. Set to 0 to disable timing out.

3.149. imap_qresync

Type: boolean
Default: no

When set, mutt will use the QRESYNC extension (RFC 7162) if advertised by the server. Mutt's current implementation is basic, used only for initial message fetching and flag updates.

Note: this feature is currently experimental. If you experience strange behavior, such as duplicate or missing messages please file a bug report to let us know.

3.150. imap_servernoise

Type: boolean
Default: yes

When set, mutt will display warning messages from the IMAP server as error messages. Since these messages are often harmless, or generated due to configuration problems on the server which are out of the users' hands, you may wish to suppress them at some point.

3.151. imap_user

Type: string
Default: (empty)

The name of the user whose mail you intend to access on the IMAP server.

This variable defaults to your user name on the local machine.

3.152. implicit_autoview

Type: boolean
Default: no

If set to yes, mutt will look for a mailcap entry with the copiousoutput flag set for every MIME attachment it doesn't have an internal viewer defined for. If such an entry is found, mutt will use the viewer defined in that entry to convert the body part to text form.

3.153. include

Type: quadoption
Default: ask-yes

Controls whether or not a copy of the message(s) you are replying to is included in your reply.

3.154. include_encrypted

Type: boolean
Default: no

Controls whether or not Mutt includes separately encrypted attachment contents when replying.

This variable was added to prevent accidental exposure of encrypted contents when replying to an attacker. If a previously encrypted message were attached by the attacker, they could trick an unwary recipient into decrypting and including the message in their reply.

3.155. include_onlyfirst

Type: boolean
Default: no

Controls whether or not Mutt includes only the first attachment of the message you are replying.

3.156. indent_string

Type: string
Default: 

Specifies the string to prepend to each line of text quoted in a message to which you are replying. You are strongly encouraged not to change this value, as it tends to agitate the more fanatical netizens.

The value of this option is ignored if $text_flowed is set, because the quoting mechanism is strictly defined for format=flowed.

This option is a format string, please see the description of $index_format for supported printf(3)-style sequences.

3.157. index_format

Type: string
Default: %4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s

This variable allows you to customize the message index display to your personal taste.

Format strings are similar to the strings used in the C function printf(3) to format output (see the man page for more details). For an explanation of the %? construct, see the $status_format description. The following sequences are defined in Mutt:

%a address of the author
%A reply-to address (if present; otherwise: address of author)
%b filename of the original message folder (think mailbox)
%B the list to which the letter was sent, or else the folder name (%b).
%c number of characters (bytes) in the message (see formatstrings-size)
%C current message number
%d date and time of the message in the format specified by $date_format converted to sender's time zone
%D date and time of the message in the format specified by $date_format converted to the local time zone
%e current message number in thread
%E number of messages in current thread
%f sender (address + real name), either From: or Return-Path:
%F author name, or recipient name if the message is from you
%H spam attribute(s) of this message
%i message-id of the current message
%l number of lines in the unprocessed message (may not work with maildir, mh, and IMAP folders)
%L If an address in the To: or Cc: header field matches an address defined by the users subscribe command, this displays "To <list-name>", otherwise the same as %F.
%m total number of message in the mailbox
%M number of hidden messages if the thread is collapsed.
%N message score
%n author's real name (or address if missing)
%O original save folder where mutt would formerly have stashed the message: list name or recipient name if not sent to a list
%P progress indicator for the built-in pager (how much of the file has been displayed)
%r comma separated list of To: recipients
%R comma separated list of Cc: recipients
%s subject of the message
%S single character status of the message (N/O/D/d/!/r/*)
%t To: field (recipients)
%T the appropriate character from the $to_chars string
%u user (login) name of the author
%v first name of the author, or the recipient if the message is from you
%X number of attachments (please see the attachments section for possible speed effects)
%y X-Label: field, if present
%Y X-Label: field, if present, and (1) not at part of a thread tree, (2) at the top of a thread, or (3) X-Label: is different from preceding message's X-Label:.
%Z a three character set of message status flags. the first character is new/read/replied flags (n/o/r/O/N). the second is deleted or encryption flags (D/d/S/P/s/K). the third is either tagged/flagged (*/!), or one of the characters listed in $to_chars.
%@name@ insert and evaluate format-string from the matching index-format-hook command
%{fmt} the date and time of the message is converted to sender's time zone, and fmt is expanded by the library function strftime(3); a leading bang disables locales
%[fmt] the date and time of the message is converted to the local time zone, and fmt is expanded by the library function strftime(3); a leading bang disables locales
%(fmt) the local date and time when the message was received. fmt is expanded by the library function strftime(3); a leading bang disables locales
%<fmt> the current local time. fmt is expanded by the library function strftime(3); a leading bang disables locales.
%>X right justify the rest of the string and pad with character X
%|X pad to the end of the line with character X
%*X soft-fill with character X as pad

Note that for mbox/mmdf, %l applies to the unprocessed message, and for maildir/mh, the value comes from the Lines: header field when present (the meaning is normally the same). Thus the value depends on the encodings used in the different parts of the message and has little meaning in practice.

Soft-fill deserves some explanation: Normal right-justification will print everything to the left of the %>, displaying padding and whatever lies to the right only if there's room. By contrast, soft-fill gives priority to the right-hand side, guaranteeing space to display it and showing padding only if there's still room. If necessary, soft-fill will eat text leftwards to make room for rightward text.

Note that these expandos are supported in save-hook, fcc-hook, fcc-save-hook, and index-format-hook.

They are also supported in the configuration variables $attribution, $forward_attribution_intro, $forward_attribution_trailer, $forward_format, $indent_string, $message_format, $pager_format, and $post_indent_string.

3.158. ispell

Type: path
Default: ispell

How to invoke ispell (GNU's spell-checking software).

3.159. keep_flagged

Type: boolean
Default: no

If set, read messages marked as flagged will not be moved from your spool mailbox to your $mbox mailbox, or as a result of a mbox-hook command.

3.160. mail_check

Type: number
Default: 5

This variable configures how often (in seconds) mutt should look for new mail. Also see the $timeout variable.

3.161. mail_check_recent

Type: boolean
Default: yes

When set, Mutt will only notify you about new mail that has been received since the last time you opened the mailbox. When unset, Mutt will notify you if any new mail exists in the mailbox, regardless of whether you have visited it recently.

When $mark_old is set, Mutt does not consider the mailbox to contain new mail if only old messages exist.

3.162. mail_check_stats

Type: boolean
Default: no

When set, mutt will periodically calculate message statistics of a mailbox while polling for new mail. It will check for unread, flagged, and total message counts. Because this operation is more performance intensive, it defaults to unset, and has a separate option, $mail_check_stats_interval, to control how often to update these counts.

Message statistics can also be explicitly calculated by invoking the <check-stats> function.

3.163. mail_check_stats_interval

Type: number
Default: 60

When $mail_check_stats is set, this variable configures how often (in seconds) mutt will update message counts.

3.164. mailcap_path

Type: string
Default: (empty)

This variable specifies which files to consult when attempting to display MIME bodies not directly supported by Mutt. The default value is generated during startup: see the mailcap section of the manual.

3.165. mailcap_sanitize

Type: boolean
Default: yes

If set, mutt will restrict possible characters in mailcap % expandos to a well-defined set of safe characters. This is the safe setting, but we are not sure it doesn't break some more advanced MIME stuff.

DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE DOING!

3.166. maildir_header_cache_verify

Type: boolean
Default: yes

Check for Maildir unaware programs other than mutt having modified maildir files when the header cache is in use. This incurs one stat(2) per message every time the folder is opened (which can be very slow for NFS folders).

3.167. maildir_trash

Type: boolean
Default: no

If set, messages marked as deleted will be saved with the maildir trashed flag instead of unlinked. Note: this only applies to maildir-style mailboxes. Setting it will have no effect on other mailbox types.

3.168. maildir_check_cur

Type: boolean
Default: no

If set, mutt will poll both the new and cur directories of a maildir folder for new messages. This might be useful if other programs interacting with the folder (e.g. dovecot) are moving new messages to the cur directory. Note that setting this option may slow down polling for new messages in large folders, since mutt has to scan all cur messages.

3.169. mark_macro_prefix

Type: string
Default: '

Prefix for macros created using mark-message. A new macro automatically generated with <mark-message>a will be composed from this prefix and the letter a.

3.170. mark_old

Type: boolean
Default: yes

Controls whether or not mutt marks new unread messages as old if you exit a mailbox without reading them. With this option set, the next time you start mutt, the messages will show up with an O next to them in the index menu, indicating that they are old.

3.171. markers

Type: boolean
Default: yes

Controls the display of wrapped lines in the internal pager. If set, a + marker is displayed at the beginning of wrapped lines.

Also see the $smart_wrap variable.

3.172. mask

Type: regular expression
Default: !^\.[^.]

A regular expression used in the file browser, optionally preceded by the not operator !. Only files whose names match this mask will be shown. The match is always case-sensitive.

3.173. mbox

Type: path
Default: ~/mbox

This specifies the folder into which read mail in your $spoolfile folder will be appended.

Also see the $move variable.

3.174. mbox_type

Type: folder magic
Default: mbox

The default mailbox type used when creating new folders. May be any of mbox, MMDF, MH and Maildir. This is overridden by the -m command-line option.

3.175. menu_context

Type: number
Default: 0

This variable controls the number of lines of context that are given when scrolling through menus. (Similar to $pager_context.)

3.176. menu_move_off

Type: boolean
Default: yes

When unset, the bottom entry of menus will never scroll up past the bottom of the screen, unless there are less entries than lines. When set, the bottom entry may move off the bottom.

3.177. menu_scroll

Type: boolean
Default: no

When set, menus will be scrolled up or down one line when you attempt to move across a screen boundary. If unset, the screen is cleared and the next or previous page of the menu is displayed (useful for slow links to avoid many redraws).

3.178. message_cache_clean

Type: boolean
Default: no

If set, mutt will clean out obsolete entries from the message cache when the mailbox is synchronized. You probably only want to set it every once in a while, since it can be a little slow (especially for large folders).

3.179. message_cachedir

Type: path
Default: (empty)

Set this to a directory and mutt will cache copies of messages from your IMAP and POP servers here. You are free to remove entries at any time.

When setting this variable to a directory, mutt needs to fetch every remote message only once and can perform regular expression searches as fast as for local folders.

Also see the $message_cache_clean variable.

3.180. message_format

Type: string
Default: %s

This is the string displayed in the attachment menu for attachments of type message/rfc822. For a full listing of defined printf(3)-like sequences see the section on $index_format.

3.181. meta_key

Type: boolean
Default: no

If set, forces Mutt to interpret keystrokes with the high bit (bit 8) set as if the user had pressed the Esc key and whatever key remains after having the high bit removed. For example, if the key pressed has an ASCII value of 0xf8, then this is treated as if the user had pressed Esc then x. This is because the result of removing the high bit from 0xf8 is 0x78, which is the ASCII character x.

3.182. metoo

Type: boolean
Default: no

If unset, Mutt will remove your address (see the alternates command) from the list of recipients when replying to a message.

3.183. mh_purge

Type: boolean
Default: no

When unset, mutt will mimic mh's behavior and rename deleted messages to ,<old file name> in mh folders instead of really deleting them. This leaves the message on disk but makes programs reading the folder ignore it. If the variable is set, the message files will simply be deleted.

This option is similar to $maildir_trash for Maildir folders.

3.184. mh_seq_flagged

Type: string
Default: flagged

The name of the MH sequence used for flagged messages.

3.185. mh_seq_replied

Type: string
Default: replied

The name of the MH sequence used to tag replied messages.

3.186. mh_seq_unseen

Type: string
Default: unseen

The name of the MH sequence used for unseen messages.

3.187. mime_forward

Type: quadoption
Default: no

When set, the message you are forwarding will be attached as a separate message/rfc822 MIME part instead of included in the main body of the message. This is useful for forwarding MIME messages so the receiver can properly view the message as it was delivered to you. If you like to switch between MIME and not MIME from mail to mail, set this variable to ask-no or ask-yes.

Also see $forward_decode and $mime_forward_decode.

3.188. mime_forward_decode

Type: boolean
Default: no

Controls the decoding of complex MIME messages into text/plain when forwarding a message while $mime_forward is set. Otherwise $forward_decode is used instead.

3.189. mime_forward_rest

Type: quadoption
Default: yes

When forwarding multiple attachments of a MIME message from the attachment menu, attachments which cannot be decoded in a reasonable manner will be attached to the newly composed message if this option is set.

3.190. mime_type_query_command

Type: string
Default: (empty)

This specifies a command to run, to determine the mime type of a new attachment when composing a message. Unless $mime_type_query_first is set, this will only be run if the attachment's extension is not found in the mime.types file.

The string may contain a %s, which will be substituted with the attachment filename. Mutt will add quotes around the string substituted for %s automatically according to shell quoting rules, so you should avoid adding your own. If no %s is found in the string, Mutt will append the attachment filename to the end of the string.

The command should output a single line containing the attachment's mime type.

Suggested values are xdg-mime query filetype or file -bi.

3.191. mime_type_query_first

Type: boolean
Default: no

When set, the $mime_type_query_command will be run before the mime.types lookup.

3.192. mix_entry_format

Type: string
Default: %4n %c %-16s %a

This variable describes the format of a remailer line on the mixmaster chain selection screen. The following printf(3)-like sequences are supported:

%n The running number on the menu.
%c Remailer capabilities.
%s The remailer's short name.
%a The remailer's e-mail address.

3.193. mixmaster

Type: path
Default: mixmaster

This variable contains the path to the Mixmaster binary on your system. It is used with various sets of parameters to gather the list of known remailers, and to finally send a message through the mixmaster chain.

3.194. move

Type: quadoption
Default: no

Controls whether or not Mutt will move read messages from your spool mailbox to your $mbox mailbox, or as a result of a mbox-hook command.

3.195. muttlisp_inline_eval

Type: boolean
Default: no

If set, Mutt will evaluate bare parenthesis arguments to commands as MuttLisp expressions.

3.196. narrow_tree

Type: boolean
Default: no

This variable, when set, makes the thread tree narrower, allowing deeper threads to fit on the screen.

3.197. net_inc

Type: number
Default: 10

Operations that expect to transfer a large amount of data over the network will update their progress every $net_inc kilobytes. If set to 0, no progress messages will be displayed.

See also $read_inc, $write_inc and $net_inc.

3.198. new_mail_command

Type: path
Default: (empty)

If set, Mutt will call this command after a new message is received. See the $status_format documentation for the values that can be formatted into this command.

3.199. pager

Type: path
Default: builtin

This variable specifies which pager you would like to use to view messages. The value builtin means to use the built-in pager, otherwise this variable should specify the pathname of the external pager you would like to use.

Using an external pager may have some disadvantages: Additional keystrokes are necessary because you can't call mutt functions directly from the pager, and screen resizes cause lines longer than the screen width to be badly formatted in the help menu.

When using an external pager, also see $prompt_after which defaults set.

3.200. pager_context

Type: number
Default: 0

This variable controls the number of lines of context that are given when displaying the next or previous page in the internal pager. By default, Mutt will display the line after the last one on the screen at the top of the next page (0 lines of context).

This variable also specifies the amount of context given for search results. If positive, this many lines will be given before a match, if 0, the match will be top-aligned.

3.201. pager_format

Type: string
Default: -%Z- %C/%m: %-20.20n   %s%*  -- (%P)

This variable controls the format of the one-line message status displayed before each message in either the internal or an external pager. The valid sequences are listed in the $index_format section.

3.202. pager_index_lines

Type: number
Default: 0

Determines the number of lines of a mini-index which is shown when in the pager. The current message, unless near the top or bottom of the folder, will be roughly one third of the way down this mini-index, giving the reader the context of a few messages before and after the message. This is useful, for example, to determine how many messages remain to be read in the current thread. One of the lines is reserved for the status bar from the index, so a setting of 6 will only show 5 lines of the actual index. A value of 0 results in no index being shown. If the number of messages in the current folder is less than $pager_index_lines, then the index will only use as many lines as it needs.

3.203. pager_stop

Type: boolean
Default: no

When set, the internal-pager will not move to the next message when you are at the end of a message and invoke the <next-page> function.

3.204. pattern_format

Type: string
Default: %2n %-15e  %d

This variable describes the format of the pattern completion menu. The following printf(3)-style sequences are understood:

%d pattern description
%e pattern expression
%n index number

3.205. pgp_auto_decode

Type: boolean
Default: no

If set, mutt will automatically attempt to decrypt traditional PGP messages whenever the user performs an operation which ordinarily would result in the contents of the message being operated on. For example, if the user displays a pgp-traditional message which has not been manually checked with the <check-traditional-pgp> function, mutt will automatically check the message for traditional pgp.

3.206. pgp_autoinline

Type: boolean
Default: no

This option controls whether Mutt generates old-style inline (traditional) PGP encrypted or signed messages under certain circumstances. This can be overridden by use of the pgp menu, when inline is not required. The GPGME backend does not support this option.

Note that Mutt might automatically use PGP/MIME for messages which consist of more than a single MIME part. Mutt can be configured to ask before sending PGP/MIME messages when inline (traditional) would not work.

Also see the $pgp_mime_auto variable.

Also note that using the old-style PGP message format is strongly deprecated. (PGP only)

3.207. pgp_check_exit

Type: boolean
Default: yes

If set, mutt will check the exit code of the PGP subprocess when signing or encrypting. A non-zero exit code means that the subprocess failed. (PGP only)

3.208. pgp_check_gpg_decrypt_status_fd

Type: boolean
Default: yes

If set, mutt will check the status file descriptor output of $pgp_decrypt_command and $pgp_decode_command for GnuPG status codes indicating successful decryption. This will check for the presence of DECRYPTION_OKAY, absence of DECRYPTION_FAILED, and that all PLAINTEXT occurs between the BEGIN_DECRYPTION and END_DECRYPTION status codes.

If unset, mutt will instead match the status fd output against $pgp_decryption_okay. (PGP only)

3.209. pgp_clearsign_command

Type: string
Default: (empty)

This format is used to create an old-style clearsigned PGP message. Note that the use of this format is strongly deprecated.

This is a format string, see the $pgp_decode_command command for possible printf(3)-like sequences. (PGP only)

3.210. pgp_decode_command

Type: string
Default: (empty)

This format strings specifies a command which is used to decode application/pgp attachments.

The PGP command formats have their own set of printf(3)-like sequences:

%p Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty string otherwise. Note: This may be used with a %? construct.
%f Expands to the name of a file containing a message.
%s Expands to the name of a file containing the signature part of a multipart/signed attachment when verifying it.
%a The value of $pgp_sign_as if set, otherwise the value of $pgp_default_key.
%r One or more key IDs (or fingerprints if available).

For examples on how to configure these formats for the various versions of PGP which are floating around, see the pgp and gpg sample configuration files in the samples/ subdirectory which has been installed on your system alongside the documentation. (PGP only)

3.211. pgp_decrypt_command

Type: string
Default: (empty)

This command is used to decrypt a PGP encrypted message.

This is a format string, see the $pgp_decode_command command for possible printf(3)-like sequences. (PGP only)

3.212. pgp_decryption_okay

Type: regular expression
Default: (empty)

If you assign text to this variable, then an encrypted PGP message is only considered successfully decrypted if the output from $pgp_decrypt_command contains the text. This is used to protect against a spoofed encrypted message, with multipart/encrypted headers but containing a block that is not actually encrypted. (e.g. simply signed and ascii armored text).

Note that if $pgp_check_gpg_decrypt_status_fd is set, this variable is ignored. (PGP only)

3.213. pgp_default_key

Type: string
Default: (empty)

This is the default key-pair to use for PGP operations. It will be used for encryption (see $postpone_encrypt and $pgp_self_encrypt).

It will also be used for signing unless $pgp_sign_as is set.

The (now deprecated) pgp_self_encrypt_as is an alias for this variable, and should no longer be used. (PGP only)

3.214. pgp_encrypt_only_command

Type: string
Default: (empty)

This command is used to encrypt a body part without signing it.

This is a format string, see the $pgp_decode_command command for possible printf(3)-like sequences. (PGP only)

3.215. pgp_encrypt_sign_command

Type: string
Default: (empty)

This command is used to both sign and encrypt a body part.

This is a format string, see the $pgp_decode_command command for possible printf(3)-like sequences. (PGP only)

3.216. pgp_entry_format

Type: string
Default: %4n %t%f %4l/0x%k %-4a %2c %u

This variable allows you to customize the PGP key selection menu to your personal taste. This string is similar to $index_format, but has its own set of printf(3)-like sequences:

%n number
%k key id
%u user id
%a algorithm
%l key length
%f flags
%c capabilities
%t trust/validity of the key-uid association
%[<s>] date of the key where <s> is an strftime(3) expression

(PGP only)

3.217. pgp_export_command

Type: string
Default: (empty)

This command is used to export a public key from the user's key ring.

This is a format string, see the $pgp_decode_command command for possible printf(3)-like sequences. (PGP only)

3.218. pgp_getkeys_command

Type: string
Default: (empty)

This command is invoked whenever Mutt needs to fetch the public key associated with an email address. Of the sequences supported by $pgp_decode_command, %r is the only printf(3)-like sequence used with this format. Note that in this case, %r expands to the email address, not the public key ID (the key ID is unknown, which is why Mutt is invoking this command). (PGP only)

3.219. pgp_good_sign

Type: regular expression
Default: (empty)

If you assign a text to this variable, then a PGP signature is only considered verified if the output from $pgp_verify_command contains the text. Use this variable if the exit code from the command is 0 even for bad signatures. (PGP only)

3.220. pgp_ignore_subkeys

Type: boolean
Default: yes

Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead, the principal key will inherit the subkeys' capabilities. Unset this if you want to play interesting key selection games. (PGP only)

3.221. pgp_import_command

Type: string
Default: (empty)

This command is used to import a key from a message into the user's public key ring.

This is a format string, see the $pgp_decode_command command for possible printf(3)-like sequences. (PGP only)

3.222. pgp_list_pubring_command

Type: string
Default: (empty)

This command is used to list the public key ring's contents. The output format must be analogous to the one used by

gpg --list-keys --with-colons --with-fingerprint

This format is also generated by the mutt_pgpring utility which comes with mutt.

Note: gpg's fixed-list-mode option should not be used. It produces a different date format which may result in mutt showing incorrect key generation dates.

This is a format string, see the $pgp_decode_command command for possible printf(3)-like sequences. Note that in this case, %r expands to the search string, which is a list of one or more quoted values such as email address, name, or keyid. (PGP only)

3.223. pgp_list_secring_command

Type: string
Default: (empty)

This command is used to list the secret key ring's contents. The output format must be analogous to the one used by:

gpg --list-keys --with-colons --with-fingerprint

This format is also generated by the mutt_pgpring utility which comes with mutt.

Note: gpg's fixed-list-mode option should not be used. It produces a different date format which may result in mutt showing incorrect key generation dates.

This is a format string, see the $pgp_decode_command command for possible printf(3)-like sequences. Note that in this case, %r expands to the search string, which is a list of one or more quoted values such as email address, name, or keyid. (PGP only)

3.224. pgp_long_ids

Type: boolean
Default: yes

If set, use 64 bit PGP key IDs, if unset use the normal 32 bit key IDs. NOTE: Internally, Mutt has transitioned to using fingerprints (or long key IDs as a fallback). This option now only controls the display of key IDs in the key selection menu and a few other places. (PGP only)

3.225. pgp_mime_auto

Type: quadoption
Default: ask-yes

This option controls whether Mutt will prompt you for automatically sending a (signed/encrypted) message using PGP/MIME when inline (traditional) fails (for any reason).

Also note that using the old-style PGP message format is strongly deprecated. (PGP only)

3.226. pgp_replyinline

Type: boolean
Default: no

Setting this variable will cause Mutt to always attempt to create an inline (traditional) message when replying to a message which is PGP encrypted/signed inline. This can be overridden by use of the pgp menu, when inline is not required. This option does not automatically detect if the (replied-to) message is inline; instead it relies on Mutt internals for previously checked/flagged messages.

Note that Mutt might automatically use PGP/MIME for messages which consist of more than a single MIME part. Mutt can be configured to ask before sending PGP/MIME messages when inline (traditional) would not work.

Also see the $pgp_mime_auto variable.

Also note that using the old-style PGP message format is strongly deprecated. (PGP only)

3.227. pgp_retainable_sigs

Type: boolean
Default: no

If set, signed and encrypted messages will consist of nested multipart/signed and multipart/encrypted body parts.

This is useful for applications like encrypted and signed mailing lists, where the outer layer (multipart/encrypted) can be easily removed, while the inner multipart/signed part is retained. (PGP only)

3.228. pgp_self_encrypt

Type: boolean
Default: yes

When set, PGP encrypted messages will also be encrypted using the key in $pgp_default_key. (PGP only)

3.229. pgp_show_unusable

Type: boolean
Default: yes

If set, mutt will display non-usable keys on the PGP key selection menu. This includes keys which have been revoked, have expired, or have been marked as disabled by the user. (PGP only)

3.230. pgp_sign_as

Type: string
Default: (empty)

If you have a different key pair to use for signing, you should set this to the signing key. Most people will only need to set $pgp_default_key. It is recommended that you use the keyid form to specify your key (e.g. 0x00112233). (PGP only)

3.231. pgp_sign_command

Type: string
Default: (empty)

This command is used to create the detached PGP signature for a multipart/signed PGP/MIME body part.

This is a format string, see the $pgp_decode_command command for possible printf(3)-like sequences. (PGP only)

3.232. pgp_sort_keys

Type: sort order
Default: address

Specifies how the entries in the pgp menu are sorted. The following are legal values:

address sort alphabetically by user id
keyid sort alphabetically by key id
date sort by key creation date
trust sort by the trust of the key

If you prefer reverse order of the above values, prefix it with reverse-. (PGP only)

3.233. pgp_strict_enc

Type: boolean
Default: yes

If set, Mutt will automatically encode PGP/MIME signed messages as quoted-printable. Please note that unsetting this variable may lead to problems with non-verifyable PGP signatures, so only change this if you know what you are doing. (PGP only)

3.234. pgp_timeout

Type: number (long)
Default: 300

The number of seconds after which a cached passphrase will expire if not used. (PGP only)

3.235. pgp_use_gpg_agent

Type: boolean
Default: yes

If set, mutt expects a gpg-agent(1) process will handle private key passphrase prompts. If unset, mutt will prompt for the passphrase and pass it via stdin to the pgp command.

Note that as of version 2.1, GnuPG automatically spawns an agent and requires the agent be used for passphrase management. Since that version is increasingly prevalent, this variable now defaults set.

Mutt works with a GUI or curses pinentry program. A TTY pinentry should not be used.

If you are using an older version of GnuPG without an agent running, or another encryption program without an agent, you will need to unset this variable. (PGP only)

3.236. pgp_verify_command

Type: string
Default: (empty)

This command is used to verify PGP signatures.

This is a format string, see the $pgp_decode_command command for possible printf(3)-like sequences. (PGP only)

3.237. pgp_verify_key_command

Type: string
Default: (empty)

This command is used to verify key information from the key selection menu.

This is a format string, see the $pgp_decode_command command for possible printf(3)-like sequences. (PGP only)

3.238. pipe_decode

Type: boolean
Default: no

Used in connection with the <pipe-message> function. When unset, Mutt will pipe the messages without any preprocessing. When set, Mutt will attempt to decode the messages first.

Also see $pipe_decode_weed, which controls whether headers will be weeded when this is set.

3.239. pipe_decode_weed

Type: boolean
Default: yes

For <pipe-message>, when $pipe_decode is set, this further controls whether Mutt will weed headers.

3.240. pipe_sep

Type: string
Default: \n

The separator to add between messages when piping a list of tagged messages to an external Unix command.

3.241. pipe_split

Type: boolean
Default: no

Used in connection with the <pipe-message> function following <tag-prefix>. If this variable is unset, when piping a list of tagged messages Mutt will concatenate the messages and will pipe them all concatenated. When set, Mutt will pipe the messages one by one. In both cases the messages are piped in the current sorted order, and the $pipe_sep separator is added after each message.

3.242. pop_auth_try_all

Type: boolean
Default: yes

If set, Mutt will try all available authentication methods. When unset, Mutt will only fall back to other authentication methods if the previous methods are unavailable. If a method is available but authentication fails, Mutt will not connect to the POP server.

3.243. pop_authenticators

Type: string
Default: (empty)

This is a colon-delimited list of authentication methods mutt may attempt to use to log in to an POP server, in the order mutt should try them. Authentication methods are either user, apop or any SASL mechanism, e.g. digest-md5, gssapi or cram-md5. This option is case-insensitive. If this option is unset (the default) mutt will try all available methods, in order from most-secure to least-secure.

Example:

set pop_authenticators="digest-md5:apop:user"

3.244. pop_checkinterval

Type: number
Default: 60

This variable configures how often (in seconds) mutt should look for new mail in the currently selected mailbox if it is a POP mailbox.

3.245. pop_delete

Type: quadoption
Default: ask-no

If set, Mutt will delete successfully downloaded messages from the POP server when using the <fetch-mail> function. When unset, Mutt will download messages but also leave them on the POP server.

3.246. pop_host

Type: string
Default: (empty)

The name of your POP server for the <fetch-mail> function. You can also specify an alternative port, username and password, i.e.:

[pop[s]://][username[:password]@]popserver[:port]

where [...] denotes an optional part.

3.247. pop_last

Type: boolean
Default: no

If this variable is set, mutt will try to use the LAST POP command for retrieving only unread messages from the POP server when using the <fetch-mail> function.

3.248. pop_oauth_refresh_command

Type: string
Default: (empty)

The command to run to generate an OAUTH refresh token for authorizing your connection to your POP server. This command will be run on every connection attempt that uses the OAUTHBEARER authentication mechanism. See oauth for details.

3.249. pop_pass

Type: string
Default: (empty)

Specifies the password for your POP account. If unset, Mutt will prompt you for your password when you open a POP mailbox.

Warning: you should only use this option when you are on a fairly secure machine, because the superuser can read your muttrc even if you are the only one who can read the file.

3.250. pop_reconnect

Type: quadoption
Default: ask-yes

Controls whether or not Mutt will try to reconnect to the POP server if the connection is lost.

3.251. pop_user

Type: string
Default: (empty)

Your login name on the POP server.

This variable defaults to your user name on the local machine.

3.252. post_indent_string

Type: string
Default: (empty)

Similar to the $attribution variable, Mutt will append this string after the inclusion of a message which is being replied to. For a full listing of defined printf(3)-like sequences see the section on $index_format.

3.253. postpone

Type: quadoption
Default: ask-yes

Controls whether or not messages are saved in the $postponed mailbox when you elect not to send immediately.

Also see the $recall variable.

3.254. postponed

Type: path
Default: ~/postponed

Mutt allows you to indefinitely postpone sending a message which you are editing. When you choose to postpone a message, Mutt saves it in the mailbox specified by this variable.

Also see the $postpone variable.

3.255. postpone_encrypt

Type: boolean
Default: no

When set, postponed messages that are marked for encryption will be self-encrypted. Mutt will first try to encrypt using the value specified in $pgp_default_key or $smime_default_key. If those are not set, it will try the deprecated $postpone_encrypt_as. (Crypto only)

3.256. postpone_encrypt_as

Type: string
Default: (empty)

This is a deprecated fall-back variable for $postpone_encrypt. Please use $pgp_default_key or $smime_default_key. (Crypto only)

3.257. preconnect

Type: string
Default: (empty)

If set, a shell command to be executed if mutt fails to establish a connection to the server. This is useful for setting up secure connections, e.g. with ssh(1). If the command returns a nonzero status, mutt gives up opening the server. Example:

set preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net \
sleep 20 < /dev/null > /dev/null"

Mailbox foo on mailhost.net can now be reached as {localhost:1234}foo.

Note: For this example to work, you must be able to log in to the remote machine without having to enter a password.

3.258. print

Type: quadoption
Default: ask-no

Controls whether or not Mutt really prints messages. This is set to ask-no by default, because some people accidentally hit p often.

3.259. print_command

Type: path
Default: lpr

This specifies the command pipe that should be used to print messages.

3.260. print_decode

Type: boolean
Default: yes

Used in connection with the <print-message> function. If this option is set, the message is decoded before it is passed to the external command specified by $print_command. If this option is unset, no processing will be applied to the message when printing it. The latter setting may be useful if you are using some advanced printer filter which is able to properly format e-mail messages for printing.

Also see $print_decode_weed, which controls whether headers will be weeded when this is set.

3.261. print_decode_weed

Type: boolean
Default: yes

For <print-message>, when $print_decode is set, this further controls whether Mutt will weed headers.

3.262. print_split

Type: boolean
Default: no

Used in connection with the <print-message> function. If this option is set, the command specified by $print_command is executed once for each message which is to be printed. If this option is unset, the command specified by $print_command is executed only once, and all the messages are concatenated, with a form feed as the message separator.

Those who use the enscript(1) program's mail-printing mode will most likely want to set this option.

3.263. prompt_after

Type: boolean
Default: yes

If you use an external $pager, setting this variable will cause Mutt to prompt you for a command when the pager exits rather than returning to the index menu. If unset, Mutt will return to the index menu when the external pager exits.

3.264. query_command

Type: path
Default: (empty)

This specifies the command Mutt will use to make external address queries. The string may contain a %s, which will be substituted with the query string the user types. Mutt will add quotes around the string substituted for %s automatically according to shell quoting rules, so you should avoid adding your own. If no %s is found in the string, Mutt will append the user's query to the end of the string. See query for more information.

3.265. query_format

Type: string
Default: %4c %t %-25.25a %-25.25n %?e?(%e)?

This variable describes the format of the query menu. The following printf(3)-style sequences are understood:

%a destination address
%c current entry number
%e extra information *
%n destination name
%t * if current entry is tagged, a space otherwise
%>X right justify the rest of the string and pad with X
%|X pad to the end of the line with X
%*X soft-fill with character X as pad

For an explanation of soft-fill, see the $index_format documentation.

* = can be optionally printed if nonzero, see the $status_format documentation.

3.266. quit

Type: quadoption
Default: yes

This variable controls whether quit and exit actually quit from mutt. If this option is set, they do quit, if it is unset, they have no effect, and if it is set to ask-yes or ask-no, you are prompted for confirmation when you try to quit.

3.267. quote_regexp

Type: regular expression
Default: ^([ \t]*[|>:}#])+

A regular expression used in the internal pager to determine quoted sections of text in the body of a message. Quoted text may be filtered out using the <toggle-quoted> command, or colored according to the color quoted family of directives.

Higher levels of quoting may be colored differently (color quoted1, color quoted2, etc.). The quoting level is determined by removing the last character from the matched text and recursively reapplying the regular expression until it fails to produce a match.

Match detection may be overridden by the $smileys regular expression.

3.268. read_inc

Type: number
Default: 10

If set to a value greater than 0, Mutt will display which message it is currently on when reading a mailbox or when performing search actions such as search and limit. The message is printed after this many messages have been read or searched (e.g., if set to 25, Mutt will print a message when it is at message 25, and then again when it gets to message 50). This variable is meant to indicate progress when reading or searching large mailboxes which may take some time. When set to 0, only a single message will appear before the reading the mailbox.

Also see the $write_inc, $net_inc and $time_inc variables and the tuning section of the manual for performance considerations.

3.269. read_only

Type: boolean
Default: no

If set, all folders are opened in read-only mode.

3.270. realname

Type: string
Default: (empty)

This variable specifies what real or personal name should be used when sending messages.

By default, this is the GECOS field from /etc/passwd. Note that this variable will not be used when the user has set a real name in the $from variable.

3.271. recall

Type: quadoption
Default: ask-yes

Controls whether or not Mutt recalls postponed messages when composing a new message.

Setting this variable to yes is not generally useful, and thus not recommended. Note that the <recall-message> function can be used to manually recall postponed messages.

Also see $postponed variable.

3.272. record

Type: path
Default: ~/sent

This specifies the file into which your outgoing messages should be appended. (This is meant as the primary method for saving a copy of your messages, but another way to do this is using the my_hdr command to create a Bcc: field with your email address in it.)

The value of $record is overridden by the $force_name and $save_name variables, and the fcc-hook command. Also see $copy and $write_bcc.

Multiple mailboxes may be specified if $fcc_delimiter is set to a string delimiter.

3.273. reflow_space_quotes

Type: boolean
Default: yes

This option controls how quotes from format=flowed messages are displayed in the pager and when replying (with $text_flowed unset). When set, this option adds spaces after each level of quote marks, turning ">>>foo" into "> > > foo".

Note: If $reflow_text is unset, this option has no effect. Also, this option does not affect replies when $text_flowed is set.

3.274. reflow_text

Type: boolean
Default: yes

When set, Mutt will reformat paragraphs in text/plain parts marked format=flowed. If unset, Mutt will display paragraphs unaltered from how they appear in the message body. See RFC3676 for details on the format=flowed format.

Also see $reflow_wrap, and $wrap.

3.275. reflow_wrap

Type: number
Default: 78

This variable controls the maximum paragraph width when reformatting text/plain parts when $reflow_text is set. When the value is 0, paragraphs will be wrapped at the terminal's right margin. A positive value sets the paragraph width relative to the left margin. A negative value set the paragraph width relative to the right margin.

Also see $wrap.

3.276. reply_regexp

Type: regular expression
Default: ^(re([\[0-9\]+])*|aw):[ \t]*

A regular expression used to recognize reply messages when threading and replying. The default value corresponds to the English "Re:" and the German "Aw:".

3.277. reply_self

Type: boolean
Default: no

If unset and you are replying to a message sent by you, Mutt will assume that you want to reply to the recipients of that message rather than to yourself.

Also see the alternates command.

3.278. reply_to

Type: quadoption
Default: ask-yes

If set, when replying to a message, Mutt will use the address listed in the Reply-to: header as the recipient of the reply. If unset, it will use the address in the From: header field instead. This option is useful for reading a mailing list that sets the Reply-To: header field to the list address and you want to send a private message to the author of a message.

3.279. resolve

Type: boolean
Default: yes

When set, the cursor will be automatically advanced to the next (possibly undeleted) message whenever a command that modifies the current message is executed.

3.280. resume_draft_files

Type: boolean
Default: no

If set, draft files (specified by -H on the command line) are processed similarly to when resuming a postponed message. Recipients are not prompted for; send-hooks are not evaluated; no alias expansion takes place; user-defined headers and signatures are not added to the message.

3.281. resume_edited_draft_files

Type: boolean
Default: yes

If set, draft files previously edited (via -E -H on the command line) will have $resume_draft_files automatically set when they are used as a draft file again.

The first time a draft file is saved, mutt will add a header, X-Mutt-Resume-Draft to the saved file. The next time the draft file is read in, if mutt sees the header, it will set $resume_draft_files.

This option is designed to prevent multiple signatures, user-defined headers, and other processing effects from being made multiple times to the draft file.

3.282. reverse_alias

Type: boolean
Default: no

This variable controls whether or not Mutt will display the personal name from your aliases in the index menu if it finds an alias that matches the message's sender. For example, if you have the following alias:

alias juser abd30425@somewhere.net (Joe User)

and then you receive mail which contains the following header:

From: abd30425@somewhere.net

It would be displayed in the index menu as Joe User instead of abd30425@somewhere.net. This is useful when the person's e-mail address is not human friendly.

3.283. reverse_name

Type: boolean
Default: no

It may sometimes arrive that you receive mail to a certain machine, move the messages to another machine, and reply to some the messages from there. If this variable is set, the default From: line of the reply messages is built using the address where you received the messages you are replying to if that address matches your alternates. If the variable is unset, or the address that would be used doesn't match your alternates, the From: line will use your address on the current machine.

Also see the alternates command and $reverse_realname.

3.284. reverse_realname

Type: boolean
Default: yes

This variable fine-tunes the behavior of the $reverse_name feature.

When it is unset, Mutt will remove the real name part of a matching address. This allows the use of the email address without having to also use what the sender put in the real name field.

When it is set, Mutt will use the matching address as-is.

In either case, a missing real name will be filled in afterwards using the value of $realname.

3.285. rfc2047_parameters

Type: boolean
Default: no

When this variable is set, Mutt will decode RFC2047-encoded MIME parameters. You want to set this variable when mutt suggests you to save attachments to files named like:

=?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=

When this variable is set interactively, the change won't be active until you change folders.

Note that this use of RFC2047's encoding is explicitly prohibited by the standard, but nevertheless encountered in the wild.

Also note that setting this parameter will not have the effect that mutt generates this kind of encoding. Instead, mutt will unconditionally use the encoding specified in RFC2231.

3.286. save_address

Type: boolean
Default: no

If set, mutt will take the sender's full address when choosing a default folder for saving a mail. If $save_name or $force_name is set too, the selection of the Fcc folder will be changed as well.

3.287. save_empty

Type: boolean
Default: yes

When unset, mailboxes which contain no saved messages will be removed when closed (the exception is $spoolfile which is never removed). If set, mailboxes are never removed.

Note: This only applies to mbox and MMDF folders, Mutt does not delete MH and Maildir directories.

3.288. save_history

Type: number
Default: 0

This variable controls the size of the history (per category) saved in the $history_file file.

3.289. save_name

Type: boolean
Default: no

This variable controls how copies of outgoing messages are saved. When set, a check is made to see if a mailbox specified by the recipient address exists (this is done by searching for a mailbox in the $folder directory with the username part of the recipient address). If the mailbox exists, the outgoing message will be saved to that mailbox, otherwise the message is saved to the $record mailbox.

Also see the $force_name variable.

3.290. score

Type: boolean
Default: yes

When this variable is unset, scoring is turned off. This can be useful to selectively disable scoring for certain folders when the $score_threshold_delete variable and related are used.

3.291. score_threshold_delete

Type: number
Default: -1

Messages which have been assigned a score equal to or lower than the value of this variable are automatically marked for deletion by mutt. Since mutt scores are always greater than or equal to zero, the default setting of this variable will never mark a message for deletion.

3.292. score_threshold_flag

Type: number
Default: 9999

Messages which have been assigned a score greater than or equal to this variable's value are automatically marked "flagged".

3.293. score_threshold_read

Type: number
Default: -1

Messages which have been assigned a score equal to or lower than the value of this variable are automatically marked as read by mutt. Since mutt scores are always greater than or equal to zero, the default setting of this variable will never mark a message read.

3.294. search_context

Type: number
Default: 0

For the pager, this variable specifies the number of lines shown before search results. By default, search results will be top-aligned.

3.295. send_charset

Type: string
Default: us-ascii:iso-8859-1:utf-8

A colon-delimited list of character sets for outgoing messages. Mutt will use the first character set into which the text can be converted exactly. If your $charset is not iso-8859-1 and recipients may not understand UTF-8, it is advisable to include in the list an appropriate widely used standard character set (such as iso-8859-2, koi8-r or iso-2022-jp) either instead of or after iso-8859-1.

In case the text cannot be converted into one of these exactly, mutt uses $charset as a fallback.

3.296. send_multipart_alternative

Type: quadoption
Default: no

If set, Mutt will generate a multipart/alternative container and an alternative part using the filter script specified in $send_multipart_alternative_filter. See the section MIME Multipart/Alternative (alternative-order).

Note that enabling multipart/alternative is not compatible with inline PGP encryption. Mutt will prompt to use PGP/MIME in that case.

3.297. send_multipart_alternative_filter

Type: path
Default: (empty)

This specifies a filter script, which will convert the main (composed) message of the email to an alternative format. The message will be piped to the filter's stdin. The expected output of the filter is the generated mime type, e.g. text/html, followed by a blank line, and then the converted content. See the section MIME Multipart/Alternative (alternative-order).

3.298. sendmail

Type: path
Default: /usr/sbin/sendmail -oem -oi

Specifies the program and arguments used to deliver mail sent by Mutt. Mutt expects that the specified program interprets additional arguments as recipient addresses. Mutt appends all recipients after adding a -- delimiter (if not already present). Additional flags, such as for $use_8bitmime, $use_envelope_from, $dsn_notify, or $dsn_return will be added before the delimiter.

See also: $write_bcc.

3.299. sendmail_wait

Type: number
Default: 0

Specifies the number of seconds to wait for the $sendmail process to finish before giving up and putting delivery in the background.

Mutt interprets the value of this variable as follows:

>0 number of seconds to wait for sendmail to finish before continuing
0 wait forever for sendmail to finish
<0 always put sendmail in the background without waiting

Note that if you specify a value other than 0, the output of the child process will be put in a temporary file. If there is some error, you will be informed as to where to find the output.

3.300. shell

Type: path
Default: (empty)

Command to use when spawning a subshell. By default, the user's login shell from /etc/passwd is used.

3.301. sidebar_delim_chars

Type: string
Default: /.

This contains the list of characters which you would like to treat as folder separators for displaying paths in the sidebar.

Local mail is often arranged in directories: `dir1/dir2/mailbox'.

set sidebar_delim_chars='/'

IMAP mailboxes are often named: `folder1.folder2.mailbox'.

set sidebar_delim_chars='.'

See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_indent_string.

3.302. sidebar_divider_char

Type: string
Default: |

This specifies the characters to be drawn between the sidebar (when visible) and the other Mutt panels. ASCII and Unicode line-drawing characters are supported.

3.303. sidebar_folder_indent

Type: boolean
Default: no

Set this to indent mailboxes in the sidebar.

See also: $sidebar_short_path, $sidebar_indent_string, $sidebar_delim_chars.

3.304. sidebar_format

Type: string
Default: %B%*  %n

This variable allows you to customize the sidebar display. This string is similar to $index_format, but has its own set of printf(3)-like sequences:

%B Name of the mailbox
%S * Size of mailbox (total number of messages)
%N * Number of unread messages in the mailbox
%n N if mailbox has new mail, blank otherwise
%F * Number of Flagged messages in the mailbox
%! ! : one flagged message; !! : two flagged messages; n! : n flagged messages (for n > 2). Otherwise prints nothing.
%d * @ Number of deleted messages
%L * @ Number of messages after limiting
%t * @ Number of tagged messages
%>X right justify the rest of the string and pad with X
%|X pad to the end of the line with X
%*X soft-fill with character X as pad

* = Can be optionally printed if nonzero @ = Only applicable to the current folder

In order to use %S, %N, %F, and %!, $mail_check_stats must be set. When thus set, a suggested value for this option is "%B%?F? [%F]?%* %?N?%N/?%S".

3.305. sidebar_indent_string

Type: string
Default:   

This specifies the string that is used to indent mailboxes in the sidebar. It defaults to two spaces.

See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_delim_chars.

3.306. sidebar_new_mail_only

Type: boolean
Default: no

When set, the sidebar will only display mailboxes containing new, or flagged, mail.

See also: sidebar_whitelist.

3.307. sidebar_next_new_wrap

Type: boolean
Default: no

When set, the <sidebar-next-new> command will not stop and the end of the list of mailboxes, but wrap around to the beginning. The <sidebar-prev-new> command is similarly affected, wrapping around to the end of the list.

3.308. sidebar_relative_shortpath_indent

Type: boolean
Default: no

When set, this option changes how $sidebar_short_path and $sidebar_folder_indent perform shortening and indentation: both will look at the previous sidebar entries and shorten/indent relative to the most recent parent.

An example of this option set/unset for mailboxes listed in this order, with $sidebar_short_path=yes, $sidebar_folder_indent=yes, and $sidebar_indent_string="→":

mailbox set unset
=a.b =a.b →b
=a.b.c.d →c.d →→→d
=a.b.e →e →→e

The second line illustrates most clearly. With this option set, =a.b.c.d is shortened relative to =a.b, becoming c.d; it is also indented one place relative to =a.b. With this option unset =a.b.c.d is always shortened to the last part of the mailbox, d and is indented three places, with respect to $folder (represented by '=').

When set, the third line will also be indented and shortened relative to the first line.

3.309. sidebar_short_path

Type: boolean
Default: no

By default the sidebar will show the mailbox's path, relative to the $folder variable. Setting sidebar_shortpath=yes will shorten the names relative to the previous name. Here's an example:

shortpath=no shortpath=yes shortpath=yes, folderindent=yes, indentstr=".."
fruit fruit fruit
fruit.apple apple ..apple
fruit.banana banana ..banana
fruit.cherry cherry ..cherry

See also: $sidebar_delim_chars, $sidebar_folder_indent, $sidebar_indent_string.

3.310. sidebar_sort_method

Type: sort order
Default: order

Specifies how to sort mailbox entries in the sidebar. By default, the entries are sorted alphabetically. Valid values:

  • alpha (alphabetically)

  • count (all message count)

  • flagged (flagged message count)

  • name (alphabetically)

  • new (unread message count)

  • path (alphabetically)

  • unread (unread message count)

  • unsorted

You may optionally use the reverse- prefix to specify reverse sorting order (example: set sidebar_sort_method=reverse-alpha).

3.311. sidebar_use_mailbox_shortcuts

Type: boolean
Default: no

When set, sidebar mailboxes will be displayed with mailbox shortcut prefixes "=" or "~".

When unset, the sidebar will trim off a matching $folder prefix but otherwise not use mailbox shortcuts.

3.312. sidebar_visible

Type: boolean
Default: no

This specifies whether or not to show sidebar. The sidebar shows a list of all your mailboxes.

See also: $sidebar_format, $sidebar_width

3.313. sidebar_width

Type: number
Default: 30

This controls the width of the sidebar. It is measured in screen columns. For example: sidebar_width=20 could display 20 ASCII characters, or 10 Chinese characters.

3.314. sig_dashes

Type: boolean
Default: yes

If set, a line containing -- (note the trailing space) will be inserted before your $signature. It is strongly recommended that you not unset this variable unless your signature contains just your name. The reason for this is because many software packages use -- \n to detect your signature. For example, Mutt has the ability to highlight the signature in a different color in the built-in pager.

3.315. sig_on_top

Type: boolean
Default: no

If set, the signature will be included before any quoted or forwarded text. It is strongly recommended that you do not set this variable unless you really know what you are doing, and are prepared to take some heat from netiquette guardians.

3.316. signature

Type: path
Default: ~/.signature

Specifies the filename of your signature, which is appended to all outgoing messages. If the filename ends with a pipe (|), it is assumed that filename is a shell command and input should be read from its standard output.

3.317. simple_search

Type: string
Default: ~f %s | ~s %s

Specifies how Mutt should expand a simple search into a real search pattern. A simple search is one that does not contain any of the ~ pattern modifiers. See patterns for more information on search patterns.

For example, if you simply type joe at a search or limit prompt, Mutt will automatically expand it to the value specified by this variable by replacing %s with the supplied string. For the default value, joe would be expanded to: ~f joe | ~s joe.

3.318. size_show_bytes

Type: boolean
Default: no

If set, message sizes will display bytes for values less than 1 kilobyte. See formatstrings-size.

3.319. size_show_fractions

Type: boolean
Default: yes

If set, message sizes will be displayed with a single decimal value for sizes from 0 to 10 kilobytes and 1 to 10 megabytes. See formatstrings-size.

3.320. size_show_mb

Type: boolean
Default: yes

If set, message sizes will display megabytes for values greater than or equal to 1 megabyte. See formatstrings-size.

3.321. size_units_on_left

Type: boolean
Default: no

If set, message sizes units will be displayed to the left of the number. See formatstrings-size.

3.322. sleep_time

Type: number
Default: 1

Specifies time, in seconds, to pause while displaying certain informational messages, while moving from folder to folder and after expunging messages from the current folder. The default is to pause one second, so a value of zero for this option suppresses the pause.

3.323. smart_wrap

Type: boolean
Default: yes

Controls the display of lines longer than the screen width in the internal pager. If set, long lines are wrapped at a word boundary. If unset, lines are simply wrapped at the screen edge. Also see the $markers variable.

3.324. smileys

Type: regular expression
Default: (>From )|(:[-^]?[][)(><}{|/DP])

The pager uses this variable to catch some common false positives of $quote_regexp, most notably smileys and not consider a line quoted text if it also matches $smileys. This mostly happens at the beginning of a line.

3.325. smime_ask_cert_label

Type: boolean
Default: yes

This flag controls whether you want to be asked to enter a label for a certificate about to be added to the database or not. It is set by default. (S/MIME only)

3.326. smime_ca_location

Type: path
Default: (empty)

This variable contains the name of either a directory, or a file which contains trusted certificates for use with OpenSSL. (S/MIME only)

3.327. smime_certificates

Type: path
Default: (empty)

Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle storage and retrieval of keys by itself. This is very basic right now, and keys and certificates are stored in two different directories, both named as the hash-value retrieved from OpenSSL. There is an index file which contains mailbox-address keyid pairs, and which can be manually edited. This option points to the location of the certificates. (S/MIME only)

3.328. smime_decrypt_command

Type: string
Default: (empty)

This format string specifies a command which is used to decrypt application/x-pkcs7-mime attachments.

The OpenSSL command formats have their own set of printf(3)-like sequences similar to PGP's:

%f Expands to the name of a file containing a message.
%s Expands to the name of a file containing the signature part of a multipart/signed attachment when verifying it.
%k The key-pair specified with $smime_default_key
%c One or more certificate IDs.
%a The algorithm used for encryption.
%d The message digest algorithm specified with $smime_sign_digest_alg.
%C CA location: Depending on whether $smime_ca_location points to a directory or file, this expands to -CApath $smime_ca_location or -CAfile $smime_ca_location.

For examples on how to configure these formats, see the smime.rc in the samples/ subdirectory which has been installed on your system alongside the documentation. (S/MIME only)

3.329. smime_decrypt_use_default_key

Type: boolean
Default: yes

If set (default) this tells mutt to use the default key for decryption. Otherwise, if managing multiple certificate-key-pairs, mutt will try to use the mailbox-address to determine the key to use. It will ask you to supply a key, if it can't find one. (S/MIME only)

3.330. smime_default_key

Type: string
Default: (empty)

This is the default key-pair to use for S/MIME operations, and must be set to the keyid (the hash-value that OpenSSL generates) to work properly.

It will be used for encryption (see $postpone_encrypt and $smime_self_encrypt). If GPGME is enabled, this is the key id displayed by gpgsm.

It will be used for decryption unless $smime_decrypt_use_default_key is unset.

It will also be used for signing unless $smime_sign_as is set.

The (now deprecated) smime_self_encrypt_as is an alias for this variable, and should no longer be used. (S/MIME only)

3.331. smime_encrypt_command

Type: string
Default: (empty)

This command is used to create encrypted S/MIME messages.

This is a format string, see the $smime_decrypt_command command for possible printf(3)-like sequences. (S/MIME only)

3.332. smime_encrypt_with

Type: string
Default: aes256

This sets the algorithm that should be used for encryption. Valid choices are aes128, aes192, aes256, des, des3, rc2-40, rc2-64, rc2-128. (S/MIME only)

3.333. smime_get_cert_command

Type: string
Default: (empty)

This command is used to extract X509 certificates from a PKCS7 structure.

This is a format string, see the $smime_decrypt_command command for possible printf(3)-like sequences. (S/MIME only)

3.334. smime_get_cert_email_command

Type: string
Default: (empty)

This command is used to extract the mail address(es) used for storing X509 certificates, and for verification purposes (to check whether the certificate was issued for the sender's mailbox).

This is a format string, see the $smime_decrypt_command command for possible printf(3)-like sequences. (S/MIME only)

3.335. smime_get_signer_cert_command

Type: string
Default: (empty)

This command is used to extract only the signers X509 certificate from a S/MIME signature, so that the certificate's owner may get compared to the email's From: field.

This is a format string, see the $smime_decrypt_command command for possible printf(3)-like sequences. (S/MIME only)

3.336. smime_import_cert_command

Type: string
Default: (empty)

This command is used to import a certificate via smime_keys.

This is a format string, see the $smime_decrypt_command command for possible printf(3)-like sequences. (S/MIME only)

3.337. smime_is_default

Type: boolean
Default: no

The default behavior of mutt is to use PGP on all auto-sign/encryption operations. To override and to use OpenSSL instead this must be set. However, this has no effect while replying, since mutt will automatically select the same application that was used to sign/encrypt the original message. (Note that this variable can be overridden by unsetting $crypt_autosmime.) (S/MIME only)

3.338. smime_keys

Type: path
Default: (empty)

Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle storage and retrieval of keys/certs by itself. This is very basic right now, and stores keys and certificates in two different directories, both named as the hash-value retrieved from OpenSSL. There is an index file which contains mailbox-address keyid pair, and which can be manually edited. This option points to the location of the private keys. (S/MIME only)

3.339. smime_pk7out_command

Type: string
Default: (empty)

This command is used to extract PKCS7 structures of S/MIME signatures, in order to extract the public X509 certificate(s).

This is a format string, see the $smime_decrypt_command command for possible printf(3)-like sequences. (S/MIME only)

3.340. smime_self_encrypt

Type: boolean
Default: yes

When set, S/MIME encrypted messages will also be encrypted using the certificate in $smime_default_key. (S/MIME only)

3.341. smime_sign_as

Type: string
Default: (empty)

If you have a separate key to use for signing, you should set this to the signing key. Most people will only need to set $smime_default_key. (S/MIME only)

3.342. smime_sign_command

Type: string
Default: (empty)

This command is used to created S/MIME signatures of type multipart/signed, which can be read by all mail clients.

This is a format string, see the $smime_decrypt_command command for possible printf(3)-like sequences. NOTE: %c and %k will default to $smime_sign_as if set, otherwise $smime_default_key. (S/MIME only)

3.343. smime_sign_digest_alg

Type: string
Default: sha256

This sets the algorithm that should be used for the signature message digest. Valid choices are md5, sha1, sha224, sha256, sha384, sha512. (S/MIME only)

3.344. smime_sign_opaque_command

Type: string
Default: (empty)

This command is used to created S/MIME signatures of type application/x-pkcs7-signature, which can only be handled by mail clients supporting the S/MIME extension.

This is a format string, see the $smime_decrypt_command command for possible printf(3)-like sequences. (S/MIME only)

3.345. smime_timeout

Type: number (long)
Default: 300

The number of seconds after which a cached passphrase will expire if not used. (S/MIME only)

3.346. smime_verify_command

Type: string
Default: (empty)

This command is used to verify S/MIME signatures of type multipart/signed.

This is a format string, see the $smime_decrypt_command command for possible printf(3)-like sequences. (S/MIME only)

3.347. smime_verify_opaque_command

Type: string
Default: (empty)

This command is used to verify S/MIME signatures of type application/x-pkcs7-mime.

This is a format string, see the $smime_decrypt_command command for possible printf(3)-like sequences. (S/MIME only)

3.348. smtp_authenticators

Type: string
Default: (empty)

This is a colon-delimited list of authentication methods mutt may attempt to use to log in to an SMTP server, in the order mutt should try them. Authentication methods are any SASL mechanism, e.g. digest-md5, gssapi or cram-md5. This option is case-insensitive. If it is unset (the default) mutt will try all available methods, in order from most-secure to least-secure.

Example:

set smtp_authenticators="digest-md5:cram-md5"

3.349. smtp_oauth_refresh_command

Type: string
Default: (empty)

The command to run to generate an OAUTH refresh token for authorizing your connection to your SMTP server. This command will be run on every connection attempt that uses the OAUTHBEARER authentication mechanism. See oauth for details.

3.350. smtp_pass

Type: string
Default: (empty)

Specifies the password for your SMTP account. If unset, Mutt will prompt you for your password when you first send mail via SMTP. See $smtp_url to configure mutt to send mail via SMTP.

Warning: you should only use this option when you are on a fairly secure machine, because the superuser can read your muttrc even if you are the only one who can read the file.

3.351. smtp_url

Type: string
Default: (empty)

Defines the SMTP smarthost where sent messages should relayed for delivery. This should take the form of an SMTP URL, e.g.:

smtp[s]://[user[:pass]@]host[:port]

where [...] denotes an optional part. Setting this variable overrides the value of the $sendmail variable.

Also see $write_bcc.

3.352. sort

Type: sort order
Default: date

Specifies how to sort messages in the index menu. Valid values are:

  • date or date-sent

  • date-received

  • from

  • mailbox-order (unsorted)

  • score

  • size

  • spam

  • subject

  • threads

  • to

You may optionally use the reverse- prefix to specify reverse sorting order (example: set sort=reverse-date-sent).

3.353. sort_alias

Type: sort order
Default: alias

Specifies how the entries in the alias menu are sorted. The following are legal values:

  • address (sort alphabetically by email address)

  • alias (sort alphabetically by alias name)

  • unsorted (leave in order specified in .muttrc)

3.354. sort_aux

Type: sort order
Default: date

This provides a secondary sort for messages in the index menu, used when the $sort value is equal for two messages.

When sorting by threads, this variable controls how threads are sorted in relation to other threads, and how the branches of the thread trees are sorted. This can be set to any value that $sort can, except threads (in that case, mutt will just use date-sent). You can also specify the last- prefix in addition to the reverse- prefix, but last- must come after reverse-. The last- prefix causes messages to be sorted against its siblings by which has the last descendant, using the rest of $sort_aux as an ordering. For instance,

set sort_aux=last-date-received

would mean that if a new message is received in a thread, that thread becomes the last one displayed (or the first, if you have set sort=reverse-threads.)

Note: For reversed-threads $sort order, $sort_aux is reversed again (which is not the right thing to do, but kept to not break any existing configuration setting).

3.355. sort_browser

Type: sort order
Default: alpha

Specifies how to sort entries in the file browser. By default, the entries are sorted alphabetically. Valid values:

  • alpha (alphabetically)

  • count

  • date

  • size

  • unread

  • unsorted

You may optionally use the reverse- prefix to specify reverse sorting order (example: set sort_browser=reverse-date).

3.356. sort_re

Type: boolean
Default: yes

This variable is only useful when sorting by threads with $strict_threads unset. In that case, it changes the heuristic mutt uses to thread messages by subject. With $sort_re set, mutt will only attach a message as the child of another message by subject if the subject of the child message starts with a substring matching the setting of $reply_regexp. With $sort_re unset, mutt will attach the message whether or not this is the case, as long as the non-$reply_regexp parts of both messages are identical.

3.357. spam_separator

Type: string
Default: ,

This variable controls what happens when multiple spam headers are matched: if unset, each successive header will overwrite any previous matches value for the spam label. If set, each successive match will append to the previous, using this variable's value as a separator.

3.358. spoolfile

Type: path
Default: (empty)

If your spool mailbox is in a non-default place where Mutt cannot find it, you can specify its location with this variable. Mutt will initially set this variable to the value of the environment variable $MAIL or $MAILDIR if either is defined.

3.359. ssl_ca_certificates_file

Type: path
Default: (empty)

This variable specifies a file containing trusted CA certificates. Any server certificate that is signed with one of these CA certificates is also automatically accepted. (GnuTLS only)

Example:

set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt

3.360. ssl_client_cert

Type: path
Default: (empty)

The file containing a client certificate and its associated private key.

3.361. ssl_force_tls

Type: boolean
Default: yes

If this variable is set, Mutt will require that all connections to remote servers be encrypted. Furthermore it will attempt to negotiate TLS even if the server does not advertise the capability, since it would otherwise have to abort the connection anyway. This option supersedes $ssl_starttls.

3.362. ssl_min_dh_prime_bits

Type: number
Default: 0

This variable specifies the minimum acceptable prime size (in bits) for use in any Diffie-Hellman key exchange. A value of 0 will use the default from the GNUTLS library. (GnuTLS only)

3.363. ssl_starttls

Type: quadoption
Default: yes

If set (the default), mutt will attempt to use STARTTLS on servers advertising the capability. When unset, mutt will not attempt to use STARTTLS regardless of the server's capabilities.

Note that STARTTLS is subject to many kinds of attacks, including the ability of a machine-in-the-middle to suppress the advertising of support. Setting $ssl_force_tls is recommended if you rely on STARTTLS.

3.364. ssl_use_sslv2

Type: boolean
Default: no

If set , Mutt will use SSLv2 when communicating with servers that request it. N.B. As of 2011, SSLv2 is considered insecure, and using is inadvisable. See https://tools.ietf.org/html/rfc6176 . (OpenSSL only)

3.365. ssl_use_sslv3

Type: boolean
Default: no

If set , Mutt will use SSLv3 when communicating with servers that request it. N.B. As of 2015, SSLv3 is considered insecure, and using it is inadvisable. See https://tools.ietf.org/html/rfc7525 .

3.366. ssl_use_tlsv1

Type: boolean
Default: no

If set , Mutt will use TLSv1.0 when communicating with servers that request it. N.B. As of 2015, TLSv1.0 is considered insecure, and using it is inadvisable. See https://tools.ietf.org/html/rfc7525 .

3.367. ssl_use_tlsv1_1

Type: boolean
Default: no

If set , Mutt will use TLSv1.1 when communicating with servers that request it. N.B. As of 2015, TLSv1.1 is considered insecure, and using it is inadvisable. See https://tools.ietf.org/html/rfc7525 .

3.368. ssl_use_tlsv1_2

Type: boolean
Default: yes

If set , Mutt will use TLSv1.2 when communicating with servers that request it.

3.369. ssl_use_tlsv1_3

Type: boolean
Default: yes

If set , Mutt will use TLSv1.3 when communicating with servers that request it.

3.370. ssl_usesystemcerts

Type: boolean
Default: yes

If set to yes, mutt will use CA certificates in the system-wide certificate store when checking if a server certificate is signed by a trusted CA. (OpenSSL only)

3.371. ssl_verify_dates

Type: boolean
Default: yes

If set (the default), mutt will not automatically accept a server certificate that is either not yet valid or already expired. You should only unset this for particular known hosts, using the <account-hook> function.

3.372. ssl_verify_host

Type: boolean
Default: yes

If set (the default), mutt will not automatically accept a server certificate whose host name does not match the host used in your folder URL. You should only unset this for particular known hosts, using the <account-hook> function.

3.373. ssl_verify_partial_chains

Type: boolean
Default: no

This option should not be changed from the default unless you understand what you are doing.

Setting this variable to yes will permit verifying partial certification chains, i. e. a certificate chain where not the root, but an intermediate certificate CA, or the host certificate, are marked trusted (in $certificate_file), without marking the root signing CA as trusted.

(OpenSSL 1.0.2b and newer only).

3.374. ssl_ciphers

Type: string
Default: (empty)

Contains a colon-separated list of ciphers to use when using SSL. For OpenSSL, see ciphers(1) for the syntax of the string.

For GnuTLS, this option will be used in place of "NORMAL" at the start of the priority string. See gnutls_priority_init(3) for the syntax and more details. (Note: GnuTLS version 2.1.7 or higher is required.)

3.375. status_chars

Type: string
Default: -*%A

Controls the characters used by the %r indicator in $status_format. The first character is used when the mailbox is unchanged. The second is used when the mailbox has been changed, and it needs to be resynchronized. The third is used if the mailbox is in read-only mode, or if the mailbox will not be written when exiting that mailbox (You can toggle whether to write changes to a mailbox with the <toggle-write> operation, bound by default to %). The fourth is used to indicate that the current folder has been opened in attach- message mode (Certain operations like composing a new mail, replying, forwarding, etc. are not permitted in this mode).

3.376. status_format

Type: string (localized)
Default: -%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?B? Back:%B?%?l? %l?]---(%s/%S)-%>-(%P)---

Controls the format of the status line displayed in the index menu. This string is similar to $index_format, but has its own set of printf(3)-like sequences:

%b number of mailboxes with new mail *
%B number of backgrounded editing sessions *
%d number of deleted messages *
%f the full pathname of the current mailbox
%F number of flagged messages *
%h local hostname
%l size (in bytes) of the current mailbox (see formatstrings-size) *
%L size (in bytes) of the messages shown (i.e., which match the current limit) (see formatstrings-size) *
%m the number of messages in the mailbox *
%M the number of messages shown (i.e., which match the current limit) *
%n number of new messages in the mailbox *
%o number of old unread messages *
%p number of postponed messages *
%P percentage of the way through the index
%r modified/read-only/won't-write/attach-message indicator, according to $status_chars
%R number of read messages *
%s current sorting mode ($sort)
%S current aux sorting method ($sort_aux)
%t number of tagged messages *
%u number of unread messages *
%v Mutt version string
%V currently active limit pattern, if any *
%>X right justify the rest of the string and pad with X
%|X pad to the end of the line with X
%*X soft-fill with character X as pad

For an explanation of soft-fill, see the $index_format documentation.

* = can be optionally printed if nonzero

Some of the above sequences can be used to optionally print a string if their value is nonzero. For example, you may only want to see the number of flagged messages if such messages exist, since zero is not particularly meaningful. To optionally print a string based upon one of the above sequences, the following construct is used:

%?<sequence_char>?<optional_string>?

where sequence_char is a character from the table above, and optional_string is the string you would like printed if sequence_char is nonzero. optional_string may contain other sequences as well as normal text, but you may not nest optional strings.

Here is an example illustrating how to optionally print the number of new messages in a mailbox:

%?n?%n new messages.?

You can also switch between two strings using the following construct:

%?<sequence_char>?<if_string>&<else_string>?

If the value of sequence_char is non-zero, if_string will be expanded, otherwise else_string will be expanded.

You can force the result of any printf(3)-like sequence to be lowercase by prefixing the sequence character with an underscore (_) sign. For example, if you want to display the local hostname in lowercase, you would use: %_h.

If you prefix the sequence character with a colon (:) character, mutt will replace any dots in the expansion by underscores. This might be helpful with IMAP folders that don't like dots in folder names.

3.377. status_on_top

Type: boolean
Default: no

Setting this variable causes the status bar to be displayed on the first line of the screen rather than near the bottom. If $help is set, too it'll be placed at the bottom.

3.378. strict_threads

Type: boolean
Default: no

If set, threading will only make use of the In-Reply-To and References: fields when you $sort by message threads. By default, messages with the same subject are grouped together in pseudo threads.. This may not always be desirable, such as in a personal mailbox where you might have several unrelated messages with the subjects like hi which will get grouped together. See also $sort_re for a less drastic way of controlling this behavior.

3.379. suspend

Type: boolean
Default: yes

When unset, mutt won't stop when the user presses the terminal's susp key, usually ^Z. This is useful if you run mutt inside an xterm using a command like xterm -e mutt.

3.380. text_flowed

Type: boolean
Default: no

When set, mutt will generate format=flowed bodies with a content type of text/plain; format=flowed. This format is easier to handle for some mailing software, and generally just looks like ordinary text. To actually make use of this format's features, you'll need support in your editor.

The option only controls newly composed messages. Postponed messages, resent messages, and draft messages (via -H on the command line) will use the content-type of the source message.

Note that $indent_string is ignored when this option is set.

3.381. thorough_search

Type: boolean
Default: yes

Affects the ~b and ~h search operations described in section patterns. If set, the headers and body/attachments of messages to be searched are decoded before searching. If unset, messages are searched as they appear in the folder.

Users searching attachments or for non-ASCII characters should set this value because decoding also includes MIME parsing/decoding and possible character set conversions. Otherwise mutt will attempt to match against the raw message received (for example quoted-printable encoded or with encoded headers) which may lead to incorrect search results.

3.382. thread_received

Type: boolean
Default: no

When set, mutt uses the date received rather than the date sent to thread messages by subject.

3.383. tilde

Type: boolean
Default: no

When set, the internal-pager will pad blank lines to the bottom of the screen with a tilde (~).

3.384. time_inc

Type: number
Default: 0

Along with $read_inc, $write_inc, and $net_inc, this variable controls the frequency with which progress updates are displayed. It suppresses updates less than $time_inc milliseconds apart. This can improve throughput on systems with slow terminals, or when running mutt on a remote system.

Also see the tuning section of the manual for performance considerations.

3.385. timeout

Type: number
Default: 600

When Mutt is waiting for user input either idling in menus or in an interactive prompt, Mutt would block until input is present. Depending on the context, this would prevent certain operations from working, like checking for new mail or keeping an IMAP connection alive.

This variable controls how many seconds Mutt will at most wait until it aborts waiting for input, performs these operations and continues to wait for input.

A value of zero or less will cause Mutt to never time out.

3.386. tmpdir

Type: path
Default: (empty)

This variable allows you to specify where Mutt will place its temporary files needed for displaying and composing messages. If this variable is not set, the environment variable $TMPDIR is used. If $TMPDIR is not set then /var/tmp is used.

3.387. to_chars

Type: string
Default:  +TCFL

Controls the character used to indicate mail addressed to you. The first character is the one used when the mail is not addressed to your address. The second is used when you are the only recipient of the message. The third is when your address appears in the To: header field, but you are not the only recipient of the message. The fourth character is used when your address is specified in the Cc: header field, but you are not the only recipient. The fifth character is used to indicate mail that was sent by you. The sixth character is used to indicate when a mail was sent to a mailing-list you subscribe to.

3.388. trash

Type: path
Default: (empty)

If set, this variable specifies the path of the trash folder where the mails marked for deletion will be moved, instead of being irremediably purged.

NOTE: When you delete a message in the trash folder, it is really deleted, so that you have a way to clean the trash.

3.389. ts_icon_format

Type: string (localized)
Default: M%?n?AIL&ail?

Controls the format of the icon title, as long as $ts_enabled is set. This string is identical in formatting to the one used by $status_format.

3.390. ts_enabled

Type: boolean
Default: no

Controls whether mutt tries to set the terminal status line and icon name. Most terminal emulators emulate the status line in the window title.

3.391. ts_status_format

Type: string (localized)
Default: Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?

Controls the format of the terminal status line (or window title), provided that $ts_enabled has been set. This string is identical in formatting to the one used by $status_format.

3.392. tunnel

Type: string
Default: (empty)

Setting this variable will cause mutt to open a pipe to a command instead of a raw socket. You may be able to use this to set up preauthenticated connections to your IMAP/POP3/SMTP server. Example:

set tunnel="ssh -q mailhost.net /usr/local/libexec/imapd"

Note: For this example to work you must be able to log in to the remote machine without having to enter a password.

When set, Mutt uses the tunnel for all remote connections. Please see account-hook in the manual for how to use different tunnel commands per connection.

3.393. tunnel_is_secure

Type: boolean
Default: yes

When set, Mutt will assume the $tunnel connection does not need STARTTLS to be enabled. It will also allow IMAP PREAUTH server responses inside a tunnel to proceed. This is appropriate if $tunnel uses ssh or directly invokes the server locally.

When unset, Mutt will negotiate STARTTLS according to the ssl_starttls and ssl_force_tls variables. If ssl_force_tls is set, Mutt will abort connecting if an IMAP server responds with PREAUTH. This setting is appropriate if $tunnel does not provide security and could be tampered with by attackers.

3.394. uncollapse_jump

Type: boolean
Default: no

When set, Mutt will jump to the next unread message, if any, when the current thread is uncollapsed.

3.395. uncollapse_new

Type: boolean
Default: yes

When set, Mutt will automatically uncollapse any collapsed thread that receives a new message. When unset, collapsed threads will remain collapsed. the presence of the new message will still affect index sorting, though.

3.396. use_8bitmime

Type: boolean
Default: no

Warning: do not set this variable unless you are using a version of sendmail which supports the -B8BITMIME flag (such as sendmail 8.8.x) or you may not be able to send mail.

When set, Mutt will invoke $sendmail with the -B8BITMIME flag when sending 8-bit messages to enable ESMTP negotiation.

3.397. use_domain

Type: boolean
Default: yes

When set, Mutt will qualify all local addresses (ones without the @host portion) with the value of $hostname. If unset, no addresses will be qualified.

3.398. use_envelope_from

Type: boolean
Default: no

When set, mutt will set the envelope sender of the message. If $envelope_from_address is set, it will be used as the sender address. If unset, mutt will attempt to derive the sender from the From: header.

Note that this information is passed to sendmail command using the -f command line switch. Therefore setting this option is not useful if the $sendmail variable already contains -f or if the executable pointed to by $sendmail doesn't support the -f switch.

3.399. use_from

Type: boolean
Default: yes

When set, Mutt will generate the From: header field when sending messages. If unset, no From: header field will be generated unless the user explicitly sets one using the my_hdr command.

3.400. use_ipv6

Type: boolean
Default: yes

When set, Mutt will look for IPv6 addresses of hosts it tries to contact. If this option is unset, Mutt will restrict itself to IPv4 addresses. Normally, the default should work.

3.401. user_agent

Type: boolean
Default: no

When set, mutt will add a User-Agent: header to outgoing messages, indicating which version of mutt was used for composing them.

3.402. visual

Type: path
Default: (empty)

Specifies the visual editor to invoke when the ~v command is given in the built-in editor.

3.403. wait_key

Type: boolean
Default: yes

Controls whether Mutt will ask you to press a key after an external command has been invoked by these functions: <shell-escape>, <pipe-message>, <pipe-entry>, <print-message>, and <print-entry> commands.

It is also used when viewing attachments with auto_view, provided that the corresponding mailcap entry has a needsterminal flag, and the external program is interactive.

When set, Mutt will always ask for a key. When unset, Mutt will wait for a key only if the external command returned a non-zero status.

3.404. weed

Type: boolean
Default: yes

When set, mutt will weed headers when displaying, forwarding, or replying to messages.

Also see $copy_decode_weed, $pipe_decode_weed, $print_decode_weed.

3.405. wrap

Type: number
Default: 0

When set to a positive value, mutt will wrap text at $wrap characters. When set to a negative value, mutt will wrap text so that there are $wrap characters of empty space on the right side of the terminal. Setting it to zero makes mutt wrap at the terminal width.

Also see $reflow_wrap.

3.406. wrap_headers

Type: number
Default: 78

This option specifies the number of characters to use for wrapping an outgoing message's headers. Allowed values are between 78 and 998 inclusive.

Note: This option usually shouldn't be changed. RFC5233 recommends a line length of 78 (the default), so please only change this setting when you know what you're doing.

3.407. wrap_search

Type: boolean
Default: yes

Controls whether searches wrap around the end.

When set, searches will wrap around the first (or last) item. When unset, incremental searches will not wrap.

3.408. wrapmargin

Type: number
Default: 0

(DEPRECATED) Equivalent to setting $wrap with a negative value.

3.409. write_bcc

Type: boolean
Default: no

Controls whether mutt writes out the Bcc: header when preparing messages to be sent. Some MTAs, such as Exim and Courier, do not strip the Bcc: header; so it is advisable to leave this unset unless you have a particular need for the header to be in the sent message.

If mutt is set to deliver directly via SMTP (see $smtp_url), this option does nothing: mutt will never write out the Bcc: header in this case.

Note this option only affects the sending of messages. Fcc'ed copies of a message will always contain the Bcc: header if one exists.

On Debian systems, exim4 and postfix strip BCC headers by default. The above warning applies to exim3 users, see /etc/Muttrc.

3.410. write_inc

Type: number
Default: 10

When writing a mailbox, a message will be printed every $write_inc messages to indicate progress. If set to 0, only a single message will be displayed before writing a mailbox.

Also see the $read_inc, $net_inc and $time_inc variables and the tuning section of the manual for performance considerations.

4. Functions

The following is the list of available functions listed by the mapping in which they are available. The default key setting is given, and an explanation of what the function does. The key bindings of these functions can be changed with the bind command.

4.1. Generic Menu

The generic menu is not a real menu, but specifies common functions (such as movement) available in all menus except for pager and editor. Changing settings for this menu will affect the default bindings for all menus (except as noted).

Table 9.2. Default Generic Menu Bindings

FunctionDefault keyDescription
<top-page>Hmove to the top of the page
<next-entry>jmove to the next entry
<previous-entry>kmove to the previous entry
<bottom-page>Lmove to the bottom of the page
<refresh>^Lclear and redraw the screen
<middle-page>Mmove to the middle of the page
<search-next>nsearch for next match
<exit>qexit this menu
<tag-entry>ttag the current entry
<next-page>zmove to the next page
<previous-page>Zmove to the previous page
<last-entry>*move to the last entry
<first-entry>=move to the first entry
<enter-command>:enter a muttrc command
<next-line>>scroll down one line
<previous-line><scroll up one line
<half-up>[scroll up 1/2 page
<half-down>]scroll down 1/2 page
<help>?this screen
<tag-prefix>;apply next function to tagged messages
<tag-prefix-cond> apply next function ONLY to tagged messages
<end-cond> end of conditional execution (noop)
<shell-escape>!invoke a command in a subshell
<select-entry>MUTT_ENTER_Sselect the current entry
<search>/search for a regular expression
<search-reverse>Esc /search backwards for a regular expression
<search-opposite> search for next match in opposite direction
<jump> jump to an index number
<current-top> move entry to top of screen
<current-middle> move entry to middle of screen
<current-bottom> move entry to bottom of screen
<error-history> display recent history of error messages
<what-key> display the keycode for a key press
<check-stats> calculate message statistics for all mailboxes

4.2. Index Menu

Table 9.3. Default Index Menu Bindings

FunctionDefault keyDescription
<create-alias>acreate an alias from a message sender
<autocrypt-acct-menu>Amanage autocrypt accounts
<background-compose-menu>Blist and select backgrounded compose sessions
<bounce-message>bremail a message to another user
<break-thread>#break the thread in two
<browse-mailboxes>yselect a new mailbox from the browser
<browse-mailboxes-readonly> select a new mailbox from the browser in read only mode
<change-folder>copen a different folder
<change-folder-readonly>Esc copen a different folder in read only mode
<next-unread-mailbox> open next mailbox with new mail
<collapse-thread>Esc vcollapse/uncollapse current thread
<collapse-all>Esc Vcollapse/uncollapse all threads
<compose-to-sender> compose new message to the current message sender
<copy-message>Ccopy a message to a file/mailbox
<decode-copy>Esc Cmake decoded (text/plain) copy
<decode-save>Esc smake decoded copy (text/plain) and delete
<delete-message>ddelete the current entry
<delete-pattern>Ddelete messages matching a pattern
<delete-thread>^Ddelete all messages in thread
<delete-subthread>Esc ddelete all messages in subthread
<edit>eedit the raw message
<edit-label>Yadd, change, or delete a message's label
<edit-type>^Eedit attachment content type
<forward-message>fforward a message with comments
<flag-message>Ftoggle a message's 'important' flag
<group-chat-reply> reply to all recipients preserving To/Cc
<group-reply>greply to all recipients
<fetch-mail>Gretrieve mail from POP server
<imap-fetch-mail> force retrieval of mail from IMAP server
<imap-logout-all> logout from all IMAP servers
<display-toggle-weed>hdisplay message and toggle header weeding
<next-undeleted>jmove to the next undeleted message
<previous-undeleted>kmove to the previous undeleted message
<limit>lshow only messages matching a pattern
<link-threads>&link tagged message to the current one
<list-reply>Lreply to specified mailing list
<mail>mcompose a new mail message
<toggle-new>Ntoggle a message's 'new' flag
<toggle-write>%toggle whether the mailbox will be rewritten
<next-thread>^Njump to the next thread
<next-subthread>Esc njump to the next subthread
<purge-message> delete the current entry, bypassing the trash folder
<query>Qquery external program for addresses
<quit>qsave changes to mailbox and quit
<reply>rreply to a message
<show-limit>Esc lshow currently active limit pattern
<sort-mailbox>osort messages
<sort-reverse>Osort messages in reverse order
<print-message>pprint the current entry
<previous-thread>^Pjump to previous thread
<previous-subthread>Esc pjump to previous subthread
<recall-message>Rrecall a postponed message
<read-thread>^Rmark the current thread as read
<read-subthread>Esc rmark the current subthread as read
<resend-message>Esc euse the current message as a template for a new one
<save-message>ssave message/attachment to a mailbox/file
<tag-pattern>Ttag messages matching a pattern
<tag-subthread> tag the current subthread
<tag-thread>Esc ttag the current thread
<untag-pattern>^Tuntag messages matching a pattern
<undelete-message>uundelete the current entry
<undelete-pattern>Uundelete messages matching a pattern
<undelete-subthread>Esc uundelete all messages in subthread
<undelete-thread>^Uundelete all messages in thread
<view-attachments>vshow MIME attachments
<show-version>Vshow the Mutt version number and date
<set-flag>wset a status flag on a message
<clear-flag>Wclear a status flag from a message
<display-message>MUTT_ENTER_Sdisplay a message
<mark-message>~create a hotkey macro for the current message
<buffy-list>.list mailboxes with new mail
<sync-mailbox>$save changes to mailbox
<display-address>@display full address of sender
<pipe-message>|pipe message/attachment to a shell command
<next-new> jump to the next new message
<next-new-then-unread><Tab>jump to the next new or unread message
<previous-new> jump to the previous new message
<previous-new-then-unread>Esc <Tab>jump to the previous new or unread message
<next-unread> jump to the next unread message
<previous-unread> jump to the previous unread message
<parent-message>Pjump to parent message in thread
<root-message> jump to root message in thread
<extract-keys>^Kextract supported public keys
<forget-passphrase>^Fwipe passphrase(s) from memory
<check-traditional-pgp>Esc Pcheck for classic PGP
<mail-key>Esc kmail a PGP public key
<decrypt-copy> make decrypted copy
<decrypt-save> make decrypted copy and delete
<sidebar-first> move the highlight to the first mailbox
<sidebar-last> move the highlight to the last mailbox
<sidebar-next> move the highlight to next mailbox
<sidebar-next-new> move the highlight to next mailbox with new mail
<sidebar-open> open highlighted mailbox
<sidebar-page-down> scroll the sidebar down 1 page
<sidebar-page-up> scroll the sidebar up 1 page
<sidebar-prev> move the highlight to previous mailbox
<sidebar-prev-new> move the highlight to previous mailbox with new mail
<sidebar-toggle-visible> make the sidebar (in)visible

4.3. Pager Menu

Table 9.4. Default Pager Menu Bindings

FunctionDefault keyDescription
<background-compose-menu>Blist and select backgrounded compose sessions
<break-thread>#break the thread in two
<browse-mailboxes>yselect a new mailbox from the browser
<browse-mailboxes-readonly> select a new mailbox from the browser in read only mode
<create-alias>acreate an alias from a message sender
<bounce-message>bremail a message to another user
<change-folder>copen a different folder
<change-folder-readonly>Esc copen a different folder in read only mode
<next-unread-mailbox> open next mailbox with new mail
<compose-to-sender> compose new message to the current message sender
<copy-message>Ccopy a message to a file/mailbox
<decode-copy>Esc Cmake decoded (text/plain) copy
<delete-message>ddelete the current entry
<delete-thread>^Ddelete all messages in thread
<delete-subthread>Esc ddelete all messages in subthread
<set-flag>wset a status flag on a message
<clear-flag>Wclear a status flag from a message
<edit>eedit the raw message
<edit-label>Yadd, change, or delete a message's label
<edit-type>^Eedit attachment content type
<forward-message>fforward a message with comments
<flag-message>Ftoggle a message's 'important' flag
<group-chat-reply> reply to all recipients preserving To/Cc
<group-reply>greply to all recipients
<imap-fetch-mail> force retrieval of mail from IMAP server
<imap-logout-all> logout from all IMAP servers
<display-toggle-weed>hdisplay message and toggle header weeding
<next-undeleted>jmove to the next undeleted message
<next-entry>Jmove to the next entry
<previous-undeleted>kmove to the previous undeleted message
<previous-entry>Kmove to the previous entry
<link-threads>&link tagged message to the current one
<list-reply>Lreply to specified mailing list
<redraw-screen>^Lclear and redraw the screen
<mail>mcompose a new mail message
<mark-as-new>Ntoggle a message's 'new' flag
<toggle-write>%toggle whether the mailbox will be rewritten
<search-next>nsearch for next match
<next-thread>^Njump to the next thread
<next-subthread>Esc njump to the next subthread
<sort-mailbox>osort messages
<sort-reverse>Osort messages in reverse order
<print-message>pprint the current entry
<previous-thread>^Pjump to previous thread
<previous-subthread>Esc pjump to previous subthread
<purge-message> delete the current entry, bypassing the trash folder
<quit>Qsave changes to mailbox and quit
<exit>qexit this menu
<reply>rreply to a message
<recall-message>Rrecall a postponed message
<read-thread>^Rmark the current thread as read
<read-subthread>Esc rmark the current subthread as read
<resend-message>Esc euse the current message as a template for a new one
<save-message>ssave message/attachment to a mailbox/file
<skip-quoted>Sskip beyond quoted text
<decode-save>Esc smake decoded copy (text/plain) and delete
<tag-message>ttag the current entry
<toggle-quoted>Ttoggle display of quoted text
<undelete-message>uundelete the current entry
<undelete-subthread>Esc uundelete all messages in subthread
<undelete-thread>^Uundelete all messages in thread
<view-attachments>vshow MIME attachments
<show-version>Vshow the Mutt version number and date
<search-toggle>\\toggle search pattern coloring
<display-address>@display full address of sender
<next-new> jump to the next new message
<pipe-message>|pipe message/attachment to a shell command
<help>?this screen
<next-page><Space>move to the next page
<previous-page>-move to the previous page
<top>^jump to the top of the message
<sync-mailbox>$save changes to mailbox
<shell-escape>!invoke a command in a subshell
<enter-command>:enter a muttrc command
<buffy-list>.list mailboxes with new mail
<search>/search for a regular expression
<search-reverse>Esc /search backwards for a regular expression
<search-opposite> search for next match in opposite direction
<next-line>MUTT_ENTER_Sscroll down one line
<error-history> display recent history of error messages
<jump> jump to an index number
<next-unread> jump to the next unread message
<previous-new> jump to the previous new message
<previous-unread> jump to the previous unread message
<half-up> scroll up 1/2 page
<half-down> scroll down 1/2 page
<previous-line> scroll up one line
<bottom> jump to the bottom of the message
<parent-message>Pjump to parent message in thread
<root-message> jump to root message in thread
<check-traditional-pgp>Esc Pcheck for classic PGP
<mail-key>Esc kmail a PGP public key
<extract-keys>^Kextract supported public keys
<forget-passphrase>^Fwipe passphrase(s) from memory
<decrypt-copy> make decrypted copy
<decrypt-save> make decrypted copy and delete
<what-key> display the keycode for a key press
<check-stats> calculate message statistics for all mailboxes
<sidebar-first> move the highlight to the first mailbox
<sidebar-last> move the highlight to the last mailbox
<sidebar-next> move the highlight to next mailbox
<sidebar-next-new> move the highlight to next mailbox with new mail
<sidebar-open> open highlighted mailbox
<sidebar-page-down> scroll the sidebar down 1 page
<sidebar-page-up> scroll the sidebar up 1 page
<sidebar-prev> move the highlight to previous mailbox
<sidebar-prev-new> move the highlight to previous mailbox with new mail
<sidebar-toggle-visible> make the sidebar (in)visible

4.4. Alias Menu

Table 9.5. Default Alias Menu Bindings

FunctionDefault keyDescription
<delete-entry>ddelete the current entry
<undelete-entry>uundelete the current entry

4.5. Query Menu

Table 9.6. Default Query Menu Bindings

FunctionDefault keyDescription
<create-alias>acreate an alias from a message sender
<mail>mcompose a new mail message
<query>Qquery external program for addresses
<query-append>Aappend new query results to current results

4.6. Attachment Menu

Table 9.7. Default Attachment Menu Bindings

FunctionDefault keyDescription
<bounce-message>bremail a message to another user
<display-toggle-weed>hdisplay message and toggle header weeding
<compose-to-sender> compose new message to the current message sender
<edit-type>^Eedit attachment content type
<print-entry>pprint the current entry
<save-entry>ssave message/attachment to a mailbox/file
<pipe-entry>|pipe message/attachment to a shell command
<view-mailcap>mforce viewing of attachment using mailcap
<reply>rreply to a message
<resend-message>Esc euse the current message as a template for a new one
<group-chat-reply> reply to all recipients preserving To/Cc
<group-reply>greply to all recipients
<list-reply>Lreply to specified mailing list
<forward-message>fforward a message with comments
<view-text>Tview attachment as text
<view-attach>MUTT_ENTER_Sview attachment using mailcap entry if necessary
<delete-entry>ddelete the current entry
<undelete-entry>uundelete the current entry
<collapse-parts>vToggle display of subparts
<check-traditional-pgp>Esc Pcheck for classic PGP
<extract-keys>^Kextract supported public keys
<forget-passphrase>^Fwipe passphrase(s) from memory

4.7. Compose Menu

Table 9.8. Default Compose Menu Bindings

FunctionDefault keyDescription
<attach-file>aattach file(s) to this message
<attach-message>Aattach message(s) to this message
<edit-bcc>bedit the BCC list
<edit-cc>cedit the CC list
<copy-file>Csave message/attachment to a mailbox/file
<detach-file>Ddelete the current entry
<toggle-disposition>^Dtoggle disposition between inline/attachment
<edit-description>dedit attachment description
<edit-message>eedit the message
<edit-headers>Eedit the message with headers
<edit-file>^X eedit the file to be attached
<edit-encoding>^Eedit attachment transfer-encoding
<edit-from>Esc fedit the from field
<edit-fcc>fenter a file to save a copy of this message in
<filter-entry>Ffilter attachment through a shell command
<get-attachment>Gget a temporary copy of an attachment
<display-toggle-weed>hdisplay message and toggle header weeding
<ispell>irun ispell on the message
<print-entry>lprint the current entry
<edit-mime>medit attachment using mailcap entry
<new-mime>ncompose new attachment using mailcap entry
<autocrypt-menu>oshow autocrypt compose menu options
<postpone-message>Psave this message to send later
<edit-reply-to>redit the Reply-To field
<rename-attachment>^Osend attachment with a different name
<rename-file>Rrename/move an attached file
<edit-subject>sedit the subject of this message
<edit-to>tedit the TO list
<edit-type>^Tedit attachment content type
<write-fcc>wwrite the message to a folder
<toggle-unlink>utoggle whether to delete file after sending it
<toggle-recode> toggle recoding of this attachment
<update-encoding>Uupdate an attachment's encoding info
<view-attach>MUTT_ENTER_Sview attachment using mailcap entry if necessary
<view-alt>vview multipart/alternative
<view-alt-text>Esc vview multipart/alternative as text
<view-alt-mailcap>Vview multipart/alternative using mailcap
<send-message>ysend the message
<pipe-entry>|pipe message/attachment to a shell command
<move-down> move attachment down in compose menu list
<move-up> move attachment up in compose menu list
<attach-key>Esc kattach a PGP public key
<pgp-menu>pshow PGP options
<forget-passphrase>^Fwipe passphrase(s) from memory
<smime-menu>Sshow S/MIME options
<mix>Msend the message through a mixmaster remailer chain

4.8. Postpone Menu

Table 9.9. Default Postpone Menu Bindings

FunctionDefault keyDescription
<delete-entry>ddelete the current entry
<undelete-entry>uundelete the current entry

4.9. Browser Menu

Table 9.10. Default Browser Menu Bindings

FunctionDefault keyDescription
<change-dir>cchange directories
<descend-directory> descend into a directory
<display-filename>@display the currently selected file's name
<enter-mask>menter a file mask
<sort>osort messages
<sort-reverse>Osort messages in reverse order
<select-new>Nselect a new file in this directory
<check-new> check mailboxes for new mail
<toggle-mailboxes><Tab>toggle whether to browse mailboxes or all files
<view-file><Space>view file
<buffy-list>.list mailboxes with new mail
<create-mailbox>Ccreate a new mailbox (IMAP only)
<delete-mailbox>ddelete the current mailbox (IMAP only)
<rename-mailbox>rrename the current mailbox (IMAP only)
<subscribe>ssubscribe to current mailbox (IMAP only)
<unsubscribe>uunsubscribe from current mailbox (IMAP only)
<toggle-subscribed>Ttoggle view all/subscribed mailboxes (IMAP only)

4.10. Pgp Menu

Table 9.11. Default Pgp Menu Bindings

FunctionDefault keyDescription
<verify-key>cverify a PGP public key
<view-name>%view the key's user id

4.11. Smime Menu

Table 9.12. Default Smime Menu Bindings

FunctionDefault keyDescription
<verify-key>cverify a PGP public key
<view-name>%view the key's user id

4.12. Mixmaster Menu

Table 9.13. Default Mixmaster Menu Bindings

FunctionDefault keyDescription
<accept>MUTT_ENTER_Saccept the chain constructed
<append>aappend a remailer to the chain
<insert>iinsert a remailer into the chain
<delete>ddelete a remailer from the chain
<chain-prev><Left>select the previous element of the chain
<chain-next><Right>select the next element of the chain

4.13. Editor Menu

Table 9.14. Default Editor Menu Bindings

FunctionDefault keyDescription
<bol>^Ajump to the beginning of the line
<backward-char>^Bmove the cursor one character to the left
<backward-word>Esc bmove the cursor to the beginning of the word
<capitalize-word>Esc ccapitalize the word
<downcase-word>Esc lconvert the word to lower case
<upcase-word>Esc uconvert the word to upper case
<delete-char>^Ddelete the char under the cursor
<eol>^Ejump to the end of the line
<forward-char>^Fmove the cursor one character to the right
<forward-word>Esc fmove the cursor to the end of the word
<backspace><Backspace>delete the char in front of the cursor
<kill-eol>^Kdelete chars from cursor to end of line
<kill-eow>Esc ddelete chars from the cursor to the end of the word
<kill-line>^Udelete all chars on the line
<quote-char>^Vquote the next typed key
<kill-word>^Wdelete the word in front of the cursor
<complete><Tab>complete filename or alias
<complete-query>^Tcomplete address with query
<buffy-cycle><Space>cycle among incoming mailboxes
<history-up>^Pscroll up through the history list
<history-down>^Nscroll down through the history list
<history-search>^Rsearch through the history list
<transpose-chars> transpose character under cursor with previous

4.14. Autocrypt Account Menu

Table 9.15. Default Autocrypt Account Menu Bindings

FunctionDefault keyDescription
<create-account>ccreate a new autocrypt account
<delete-account>Ddelete the current account
<toggle-active>atoggle the current account active/inactive
<toggle-prefer-encrypt>ptoggle the current account prefer-encrypt flag